Table of Contents
Advertisement
USE & OPERATION (CONTINUED)
FILLING WITH WATER (CONTINUED)
The Water Level Indicator is located at the front of the unit. Refill the
water tank when water level is low. Do not fill water above the "Max."
water level mark to avoid water droplets collecting on the louvers. Check
the water level in the tank before running the COOL function. Make
sure there is water in the tank by using the continuous water supply
connection or by filling the tank up to the maximum indicator level.
Running the unit in COOL mode with inadequate water may cause
pump failure.
Note: The water capacity refers to the total volume of water that can be
contained within the air cooler water tank and water distribution system.
Ice Compartment
The water capacity in the tank at the "Max." indicator level may be lower
than the actual water capacity of the air cooler.
Note: This unit does not have a mark indicating the minimum water level required.
Note: If ice is available, you may add ice in the top ice compartment to enhance the cooling
performance.
WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and
Honeycomb media.
EN
6
Advertisement
Table of Contents
