Portable Evaporative Air Cooler Safety & Maintenance Guide User tips and safety instructions Read and save these instructions before use www.honeywellhomecomfort.com E-mail: email@example.com...
THANK YOU Congratulations on your purchase of this Honeywell Evaporative Air Cooler. The Safety & Maintenance Guide and the separate User Manual are intended to provide you with important information needed to set up, operate, maintain and troubleshoot this product.
SAFETY RULES (CONTINUED) • Never pull the cord. Remove it from the electrical outlet/ socket by grasping and pulling on the plug-end of the cord. • This appliance has been manufactured for use in domestic environments and must not be used for other purposes.
USER TIPS What is Evaporative Cooling? Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep energy costs low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air.
IP44 compliant outdoor electrical outlet. • Set the unit on a solid flat surface. IMPORTANT: Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not recommended to be placed outdoors during heavy rain or snow.
This function is only available on some Honeywell Air Cooler models. Check the User Manual to see if your unit has the Continuous Water Supply Function.
TROUBLESHOOTING GUIDE Customer Service Center: See the last page of the User Manual to find the contact details for the Customer Service Center for your area. PROBLEM POSSIBLE CAUSE SOLUTION Make sure power cord is plugged in and the switch is Cord is not plugged in.
TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM POSSIBLE CAUSE SOLUTION Remote control batteries are old & used or inserted Replace with new batteries. Follow the polarity guide incorrectly in the battery inside the battery compartment. compartment. Remote control does not work. If replacing new batteries in the correct position does Damaged remote control.