Walrus TPK2T5 -1 Instruction Manual

Walrus TPK2T5 -1 Instruction Manual

Immersible pump

Advertisement

Quick Links

TPK Series
Immersible Pump
Instruction Manual
ISO 9001 Certified
WALRUS PUMP CO., LTD.

Advertisement

Table of Contents
loading

Summary of Contents for Walrus TPK2T5 -1

  • Page 1 TPK Series Immersible Pump Instruction Manual ISO 9001 Certified WALRUS PUMP CO., LTD.
  • Page 2: Ec Declaration Of Conformity

    EC Declaration of Conformity Manufacturer: Walrus Pump Co., Ltd. Address: No.83-14, Dapiantou, Sanzhi Dist., New Taipei City 252, Taiwan Declare that the machinery described: Name : Water Pump Model : TPK Series Conform to the following directive: 2006/42/EC—Machinery directive 2014/35/EU—Low voltage directive 2014/30/EU—EMC (Electromagnetic compatibility) directive...
  • Page 3: Model Explanation

    4. Installation Please read this installation and operating instructions carefully The motor surface temperature before beginning installation and is extremely high. It must be operation. mounted in the save place to avoid accidental touch. 1. Application 4.1. Mounting Position 1.1 The TPK series is multi-stage centrifugal The pump must be mounted vertically.
  • Page 4: Operation And Maintenance

    5.2 Resulting in electrical hazard and connecting box subassembly warning mark has been marked together to proper position. Finally, outside the connecting box. Be screw the frame bolts tight, and put careful. the fan cover back. 5.3 Electrical specifications (voltage, hertz) 6.
  • Page 5: Wiring Diagram

    9. Wiring diagram 7 . 5 Th e p u m p s h o u l d n o t b e u s e d i n thetransferring of toxic or contaminated liquid. Service and maintenance will not be provided, if the pump application is not in compliant with the installation and operation procedures.
  • Page 6 10. Fault finding (Make sure electricity supply has been switched off before trouble shooting) Fault Cause 1. No electricity supply. 2. Fuses blown or breaker tripped. 1. Motor does not start 3. Overheating relay tripped. 4. Defective magnetic contacter. 5. Control circuit malfunction. 1.
  • Page 7 11. Dimensions Model (mm) (mm) (mm) (mm) (mm) TPK2T 5 - 1 TPK2T 3 - 3 TPK2T 5 - 3 TPK2T 8 - 3 TPK2T 11- 3 TPK2T 5 - 5 TPK2T 8 - 5 TPK2T 10- 5 TPK2T 11- 5 TPK2T 15- 5 Rp ¾"...
  • Page 8: Limited Warranty

    Limited Warranty Products manufactured by Walrus Pumps Co (Walrus) are warranted to the first user only to be free of defects in material and workmanship for a period of 12 months from date of installation, but no more than 24 months from date of shipment. Walrus' liability under this warranty shall be limited to repairing or replacing at our election, without charge, FOB Walrus' distribution center or authorized service agent.

This manual is also suitable for:

Tpk seriesTpk2t3-3Tpk2t11-3Tpk2t5-3Tpk2t5-5Tpk2t8-5 ... Show all

Table of Contents