Pos.request; Standby - Uniden POLARIS Owner's Manual

UT888ZL (POLARIS)-0805
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
and the individual directory appears.
5. Rotate the PUSH – SELECT knob to
select the name to request the
individual's position.
6. Press the PUSH – SELECT knob,
following screen appears. Confirm if
the name and address is correct.
Press the PUSH – SELECT knob to
select
7. If the POLARIS did not detect the
acknowledgment, press the PUSH –
SELECT knob at
seconds.
8. If the POLARIS had not detected the
acknowledgment again, the following
screen appears.
9. When the called radio sends the
position info the following screen
appears.
1-E. STANDBY
The DSC STANDBY function allows the transceiver to answer DSC calls
with the UNATTENDED message and record the calls for response at
another time. When you set the POLARIS to DSC STANDBY mode,
voice traffic may still be active on any chosen channel.
8/5/02 4:50 PM

POS.REQUEST

.
SEND .
SEND again in 10
Page 21
INDIVIDUAL
GROUP
ALL SHIPS
POS.REQUEST
POS.SEND

STANDBY

KENT NEWMAN
PAUL HUBER
JUNE BRAWLEY
EXIT
POS.REQUEST
KENT NEWMAN
654321000
SEND
CANCEL
POS.REPLY
KENT NEWMAN
654321000
WAITING
CANCEL
POS.REQUEST
KENT NEWMAN
654321000
SEND
CANCEL
POS.REPLY
06/15 15:00P
KENT NEWMAN
70.00.000N
110.00.000E
21