Uniden POLARIS Owner's Manual page 21

UT888ZL (POLARIS)-0805
4. Press the PUSH – SELECT knob,
and the individual directory will
appear.
5. Rotate the PUSH – SELECT knob to
select the individual you want to
contact.
6. Press the PUSH – SELECT knob to
transmit the individual DSC signal.
7. When you receive the individual ACK
successfully, the following screen
appears.
8. When the calling vessel has already
set "STANDBY", the following screen
appears.
Note: If there is not any data registrated in the directory, you cannot
proceed to the next step.
The user needs to select a open (unused) working channel
first, then make the call. After the acknowledgment, both radio
tune to the previously selected channel.
1-B. GROUP
1. Press and hold MENU for 2 seconds.
2. Press the PUSH – SELECT knob at
DSC CALL
will appear.
8/5/02 4:50 PM Page 18
, the DSC CALL menu
18
JUNE BRAWLEY
KENT NEWMAN
PAUL HUBER
EXIT
INDIVIDUAL
KENT NEWMAN
012345678
SEND
CANCEL
INDVLACK
PAUL HUBER
012345678
COMPLETED
INDVLACK
PAUL HUBER
012345678
UNATTENDED
TRI HI CAN
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT