Notes On The Operating Instructions; Symbols Used - Siemens Gigaset S450 Owner's Manual

u
This Guarantee shall apply to new devices
purchased in the European Union. The
Guarantee is issued by Siemens.
u
Any claims that differ from or extend
beyond these mentioned in this
manufacturer's warranty shall be excluded,
except from cases expressly specified in
the applicable law. (In no event shall
Siemens be liable for any loss of business,
profits or data, additional software loaded
by the customer or other information. The
customer shall also bear the responsibility
for the creation of backup copies of their
files. The limitation of liability shall not
apply if and to the extent liability is
mandatory under the applicable law, e.g.
according to product liability law or in the
event of intentional misconduct, severe
negligence, personal injury, damage to
parts of the human body or to personal
health, or in case of violations of
conventional obligations. However, the
claims for damages related to violation of
conventional obligations shall be limited to
predictable damages, representative of
such conventions, as long as there is no
intention or severe negligence, personal
injury, damage to parts of the human body
or to personal health, according to the
product liability law.)
u
The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
u
Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
u
The above provisions do not imply a
change in the burden of proof to the
detriment of the customer.
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.

Notes on the operating instructions

Notes on the
operating instructions
This section explains the meaning of
certain symbols and typographical
conventions that are used in this user
guide.

Symbols used

Copy Entry / Copy List
Select one of the two menu
functions specified.
~
Enter digits or letters.
The display keys' current
§Save§
functions are shown reverse
highlighted in the bottom
display line. Press the display
key below to launch the
function.
q
Press the top or the bottom of
the control key: scroll up or
down.
r
Press the right or left of the
control key: e.g. select
setting.
c / Q / * etc.
Press the corresponding key
on the handset.
(example)
47