Maintenance And Cleaning - BellSouth 100 Instruction Manual

B E L L S O U T H 1 0 0
T M
I N S T R U C T I O N M A N U A L

Maintenance and Cleaning

To maintain the appearance and function of the Bellsouth 100 egg incubator post
hatch, all chicks must be moved to a pre-warmed brooder. Unplug egg incubator
and allow to cool before cleaning.
 Maintenance or parts replacement is to be performed by a
qualified electrician.
Use a moist cloth to wipe over (avoid any chemicals or abrasive
cleaners). Solvents and alcohol based cleaners are not suitable as
they may melt or dissolve the egg incubator or its parts.

Remove all debris and dander. Brush away dust or debris with a
soft cloth or brush when egg incubator is switched off for
cleaning.
Ensure small objects or fragments do not get into ventilation
holes, near moving part or electrical components.
!
Do not alter or disassemble the egg incubator in any way.
Do not use or spray cleaners or other products in interior or exterior
of egg incubator.
Once cleaning is performed, ensure the egg incubator is completely
dry, store in an air tight area free from insects or vermin.

It is important that the turner is kept clean so that it slides
smoothly. Wash the floor, side rails and dividers in warm soapy
water and make sure the rollers on the sides roll freely when
placed back together.
Do not wash the drive motor, control box, or power pack.

Do not use the egg incubator as a brooder.
Remove water before moving.
Note
If your Bellsouth
Bayale Pty Ltd trading as Bellsouth
54 895 116 137, CAN 154 912 839. Address: 5/22 Carter Way, Dandenong South VIC Australia.
E G G I N C U B A T O R
egg incubator needs repair or parts,
TM
contact Bellsouth
TM
manufacturer of Bellsouth
6
.
TM
TM
egg incubator .
ABN