Table of Contents
Advertisement
may make the eggs bind on each other. Fill the tray with rows making sure the
rows are parallel.
If eggs roll up over each other, place blunt ends together and pointy ends
together.
i.
Once all rows are set up, ensure thermostat sensor sits about 2mm above egg
height. Place the top part of the polystyrene casing onto the base ensuring it is
secure.
j.
The eggs will be placed in rows between the plastic dividers.
k.
Plug the egg incubator into a good quality surge protector 240 volt power
protected circuit. Watch the thermometer regularly, after placing the lid on
the incubator, to ensure the temperature is set correctly. The indicator lamp
will be flashing.
l.
Push rod inwards to turn eggs in the morning. Pull rod outwards to turn eggs
in the evening. Pull more often if possible i.e. at least 3 times a day if possible.
m. Use the mini funnel to fill or refill the water channels, the locator holes are
marked on the base.
Bayale Pty Ltd trading as Bellsouth
incubator.
ABN 54 895 116 137, CAN 154 912 839. Address: 5/22 Carter Way, Dandenong
TM
manufacturer and supplier of Bellsouth
South VIC Australia.
13
TM
egg
Hide quick links:
Advertisement
Table of Contents
