Table of Contents
Advertisement
6.3.8
E-Mail Configuration
Clicking the E-Mail Config menu opens the window shown in Figure 6-14.
Figure 6-14
E-Mail Configuration Window
When certain faults occur and are detected by the ELS, it can automatically send
an E-mail to a selected E-mail address containing an error message in plain
language. Before an E-mail can be sent, it must be configured in this window and
be activated in the "Event Configuration Menu".
● E-Mail Address
Here, you enter the E-mail address to which an E-mail will be sent if an error
occurs (a maximum of 63 characters).
● "From" - Field
Address of the sender of the E-mail. Depending on the type and configuration of
the SMTP server it may be necessary to configure the sender address
(maximum of 63 characters).
Industrial Ethernet
A5E00152007-03
Diagnostics over Industrial Ethernet
65
Advertisement
Table of Contents
