Advertisement
Table of Contents
- 1 STEP 1: Lay the Headboard Face down on a Soft Surface.
- 2 STEP 2: Attach the Wood Stretcher to the Legs.
- 3 STEP 3: Lay Footboard Back down on a Padded, Clean Surface.
- 4 STEP 4: the Slat Bearers Have Been Attached in Position B.
- 5 STEP 5: Hook the Side Rails to the Headboard and Footboard.
- 6 STEP 6: Attach the Support Legs with Leveler to the Slats.
- 7 STEP 7: Arrange the Slats on the Slat Bearers Equally.
- 8 Functionality Instruction
- Download this manual
aspenhome
ITEM NO: ICB-492-BCH/BLK/EGG/GRY-KD-1
ICB-402L-BCH/BLK/EGG/GRY-1
ICB-403-BCH/BLK/EGG/GRY-1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
ICB-492
ICB-402L
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST: ICB-492
Description
No.
A Bolt Ø5/16"*1-3/4"
B Lock Washer Ø5/16"
C Flat Washer Ø5/16"
D Allen Wrench 5mm
HARDWARE LIST: ICB-402L
Description
No.
E Wood Screw
F Allen Wrench 4mm
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
Page 1/3
UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
ICB-403
Sketch Quantity
8 PCS
8 PCS
8 PCS
1 PC
Sketch Quantity
8 PCS
1 PC
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
R
Queen Framed Panel HB
Queen Side Rails
Queen Low Profile FB
All Beds need to be set up in the exact final
location so that after full assembly it will not
need to be moved. Moving the bed will cause
the support legs to move out of perpendicular
(90 degree), weaken the support system, and
may allow the bed to collapse.
COMPONENTS LIST: ICB-492
Description
No.
1 Headboard
2 Left Leg
3 Right Leg
4 Wood Stretcher
COMPONENTS LIST: ICB-402L
Description
No.
1 Bed rails
2 Slats
COMPONENTS LIST: ICB-403
Description
No.
1 Footboard
2 Bun Foot
3 Support legs with leveler
Sketch Quantity
1 PC
1 PC
1 PC
1 PC
Sketch Quantity
2 PCS
4 PCS
Sketch Quantity
1 PC
2 PCS
4 PCS
10-26-2017
Advertisement
Table of Contents
Related Manuals for aspenhome ICB-403
Summary of Contents for aspenhome ICB-403
- Page 1 2 PCS 1 Bed rails 2 Slats 4 PCS HARDWARE LIST: ICB-402L Description Sketch Quantity E Wood Screw 8 PCS COMPONENTS LIST: ICB-403 F Allen Wrench 4mm 1 PC Description Sketch Quantity 1 Footboard 1 PC 2 Bun Foot 2 PCS...
- Page 2 ASSEMBLY INSTRUCTIONS ITEM NO: ICB-492-BCH/BLK/EGG/GRY-KD-1 Queen Framed Panel HB ICB-402L-BCH/BLK/EGG/GRY-1 Queen Side Rails ICB-403-BCH/BLK/EGG/GRY-1 Queen Low Profile FB Right Leg STEP 1: Lay the headboard face down on a Headboard soft surface. Attach the left leg and right leg to headboard by using 6 bolts(A), lock washers(B) and flat washers(C).
- Page 3 ASSEMBLY INSTRUCTIONS ITEM NO: ICB-492-BCH/BLK/EGG/GRY-KD-1 Queen Framed Panel HB ICB-402L-BCH/BLK/EGG/GRY-1 Queen Side Rails ICB-403-BCH/BLK/EGG/GRY-1 Queen Low Profile FB STEP 5: Hook the side rails to the headboard and footboard. Headboard Side Rail Headboard Slat bearer Side Rail This End Up...
Need help?
Do you have a question about the ICB-403 and is the answer not in the manual?
Questions and answers