Alarm; External Digital Input 1 - Siemens DOME COLOUR CFMC1315-LP Configuration Manual

Configuration
7.4

Alarm

7.4.1

External digital input 1

34
Siemens Building Technologies
Fire Safety & Security Products
External alarms and motion sensors can be set. Connecting a sensor or other
device to the alarm input terminal notifies an alarm when the sensor detects a
trouble. For example, mounting a sensor on a door notifies an alarm each time the
door is opened. By setting the motion sensor to activate, an alarm is notified by
detecting a change in a screen.
One Alarm input1 terminal is indicated on external cable. You need to define some
parameters before u sing the alarm function.
Set an "Alarm Input"
ON: Detects an external alarm.
OFF: Does not perform alarm detection.
The following functions will be enabled if " Alarm Input" is set to "ON"
Set "Input type" for alarms
Normally Opened (NO): A dry-contact detecting way, opened if nothing occurs
but closed in case of an alarm.
Normally Closed (NC): A dry-contact detecting way, closed if nothing occurs but
open in case of an alarm.
Set "TEXT Enable" for alarms
A noticeable message of alarm can be displayed on screen if this item is set to
"ON".
Enter "Text" for alarm message
Max 24 characters can be entered.
Set "Audio out" for alarm message
Audio alarm message can be sent to external speaker if this item set to "ON".
01.2009