Configuration
7.3.3
Camera-Cropping settings
32
Siemens Building Technologies
Fire Safety & Security Products
Tick the "ENABLE" checkbox and fill in the name, then click "Set Cropping
1.
Area" to start cropping setting.
A cropping setting screen will pop-up as shown, select one type of cropping
from VGA, QVGA, 4CIF, 2CIF, CIF, QCIF, and free size on bottom screen, a
red-mesh rectangle will appear on the screen.
To select the cropping area, move mouse to the preferred position on screen,
2.
then click the left button, the red-mesh will jump to that position.
Click "OK" to finish the setting, and return to the Cropping menu.
3.
Click "SAVE" to enable the setting.
4.
01.2009