Troubleshooting
Symptoms
There is no dial tone.
The
connection
disorted/noisy.
There is a rapid engaged tone
when the phone is removed from
the receiver.
After dialing, there is no tone.
Possible Problems/ Solutions
Please wait for 1~2 minutes
after the WF723CA is turned
on.
If signal reception is poor,
move to where signal reception
is good.
Remove any electrical
sounds
appliance which is too close to
the phone or WF723CA.
The cable or phone set might
be damaged. Try using a
different cable or phone, or
contact the dealer.
Place the phone back on the
receiver and try again.
After dialing, wait 4~8 seconds
for the call to connect.
21