Siemens Simatic 620 Owner's Manual page 101

"Hardware Options" Submenu
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Figure 5-8
The parameters of the interfaces present on the basic module are set here.
Entry
PCI-MPI/DP *
On Board
Ethernet
Ethernet
Address
LAN Remote
Boot
1
* Optional product feature
SIMATIC Box PC 620 Manual
A5E00131465-01
PhoenixBIOS Setup Utility
Main
Hardware Options
[ Enabled
PCI – MPI / DP:
[Enabled]
Onboard Ethernet:
08000624xxxx
Ethernet Address:
LAN Remote Boot: [Disabled]
Cardbus/PCMCIA Slot: [Enabled]
[Enabled]
SafeCard functions:
Legacy USB Support: [Disabled]
Fan Control: [Enabled]
CRT / LCD selection: [SIMULTAN]
LCD-Screensize: [Expand]
[154]
DSTN Contrast:
PS/2 Mouse: [Enabled]
Help Select Item
F1
ESC Exit Select Menu
"Hardware Options" Submenu
1
Enables the CP5611-compatible MPI/DP interface. The recourses are
managed by the BIOS PCI plug and play mechanism.
The ethernet port on the motherboard is enabled.
[Enabled]
The ethernet port on the motherboard is disabled.
[Disabled]
The individual ethernet address is displayed here.
Booting using a connected LAN is possible. The
[Enabled]
respective boot source is displayed as
Intel Boot-Agent in the boot sequence menu.
Booting using LAN is not possible.
[Disabled]
Configuring the SIMATIC Box PC 620
Item Specific Help
Enable or disable the
]
PCI - Multi Point
Interface (MPI/DP)
+ / – Change Values F9
Enter Select
Sub-Menu F10
Meaning
Setup Defaults
Save and Exit
5-13