Cruise Control System Activation - MG 360 2016 Handbook

Cruise Control System
1 Cruise Pause/Resume Switch
2 Cruise Setting/Increase Switch
3 Cruise Master Switch
4 Cruise Setting/Decrease Switch
The cruise control system can allow the vehicle run
at a constant speed with the driver not depressing the
Starting & Driving
*
accelerator pedal. This is particularly useful when the
vehicle runs on the expressway or any road where a
constant speed can be maintained in a long distance.

Cruise Control System Activation

The cruise control system has four switches: a master
switch, a resume switch and two speed set switches. All
switches are mounted on the right side of the steering
wheel.
1 When the ignition switch is in position 2, the cruise
control system is in Off state. Press the master
switch (3), the green cruise control indicator on the
instrument illuminates, and the cruise system is in
Standby state.
2 When the cruise system is in Standby state and the
current speed is greater than 40km/h (the operating
speed range of the cruise system is 40～200 km/h),
after the SET+/SET- (2 and 4) on the steering wheel
is pressed, the cruise control indicator turns to
yellow, and the cruise system enters Activated
state. The target speed of cruise control system
is the actual speed at activation operation. After
activation, the cruise control system will control the
4
195