Reboot - Siemens SpeedStream 6500 Series User Manual

6500 Series Residential Gateway User's Guide

Reboot

You can reboot the Gateway using the Reboot option, or you can reset the Gateway to factory defaults
using the reset option. Reboot should be used when the Gateway needs to be restarted. The Gateway
can also be rebooted using the power switch on the rear panel of the Gateway. This option can be used
at either the user or administrator level.
To reboot or reset factory defaults on the Gateway:
1. Click the Reboot button from the Gateway Options pane. This displays the "System Reboot"
window.
2. If you want the factory default settings to be reset, click Reset to Factory Defaults. Reset should be
used when you find it necessary to recover the factory default settings. This may be necessary when
a custom configuration did not go as planned, when a new configuration is desired, or when the
Gateway does not appear to be working properly. This option resets all custom settings, users, and
passwords on your Gateway. You must be logged on as the administrator to use this option.
3. Click Reboot.
Miscellaneous Gateway Options
88