6500 Series Residential Gateway User's Guide
Rear Panel
DSL Port
(RJ11)
USB Port
10/100 Ethernet
Ports 1 - 4
Power Adapter
Port
Power Button
General Safety Guidelines
When using the SpeedStream Gateway, observe the following safety guidelines:
•
Never install telephone wiring during a storm.
•
Avoid using a telephone during an electrical storm. Lightening increases the risk of electrical shock.
•
Do not install telephone jacks in wet locations and never use the product near water.
•
Do not exceed the maximum power load ratings for the product; otherwise, you risk dangerous
overloading of the power circuit.
Connect the RJ11 DSL cable (looks like a telephone
cord) here to use your DSL connection through an
existing phone line.
If your Gateway has a USB port, connect the USB
cable here. The USB driver software must be
installed from the provided CD-ROM.
Connect the RJ45 Ethernet cable here to connect
your computers, hubs, or switches to the Gateway.
If your model has four ports, you can configure port
#4 as either a LAN or WAN port.
Connect the supplied power adapter provided with
the Gateway here.
Push this button to power the Gateway on and off.
5
Introduction
Example Rear Panel