Heater Specifications - DeWalt DXH50KTHC Instruction Manual

Heater Specifications

CAUTION: CSA certified for use with only No. 1-K kerosene fuel.
Factory Tested: Kerosene, Diesel #1 and #2, Fuel Oil #1 and #2, JP8 (Jet A Fuel)
Model DXH50KTHC
Burn Rate: 50,000 BTU/hr (14.7 kW)
Fuel Rate: 0.37 gal/hr (1.5 L/hr)
115 V, 60 HZ, 1 Ø, 3.5 A
Electrical Input
Min. operating voltage
Pressure Setting 3.5 psig (24 kPa)
Max. Outlet Temp. 1450 °F (787 °C)
Fuel Tank Capacity 4 gallons (15.1 L)
Ignition Direct Spark, Continuous
Spark Generator Igniter 13 kV, 10 ma
Primary Safety Control Solid State Control
Certification
DXH50KTHC & DXH75KTHC WARNING
Not suitable for use on wood floors or other combustible materials. When
used the heater should rest on a suitable insulating material at least 1 inch
thick and extending 3 feet or more beyond the heater in all directions.
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing injury or loss of
life.
- Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
- Service must be performed by a qualified service agency.
DXH75KTHC
75,000 BTU/hr (22 kW)
0.55 gal/hr (2.1 L/hr)
1115 V, 60 HZ, 1 Ø, 4 A
110 V 110 V
4.2 psig (24 kPa)
1450 °F (787 °C)
6 gallons (22.7 L)
Direct Spark, Continuous
Igniter 13 kV, 10 ma
Solid State Control
DXH135KTHC DXH175KTHC
125,000 BTU/hr (37 kW) 175,000 BTU/hr (51 kW)
0.96 gal/hr (3.5 L/hr) 1.3 gal/hr (5.0 L/hr)
115 V, 60 HZ, 1 Ø, 5.5 A 115 V, 60 HZ, 1 Ø, 5.5 A 115 V, 60 HZ, 1 Ø, 5.5 A
110 V
5.1 psig (38 kPa) 6.8 psig (40 kPa)
1450 °F (787 °C) 1450 °F (787 °C)
8.45 gallons (32 L) 13.5 gallons (51 L)
Direct Spark, Continuous Direct Spark, Continuous
Igniter 13 kV, 10 ma Igniter 13 kV, 10 ma
Solid State Control Solid State Control
CONTENTS
WARNINGS
HEATER SPECIFICATIONS
OPERATING & SAFETY PRECAUTIONS
LIGHTING/OPERATING INSTRUCTIONS
MAINTENANCE
EXPLODED VIEW AND PARTS LIST
WIRING DIAGRAM
3
DXH210KTHC
210,000 BTU/hr (61.5 kW)
1.6 gal/hr (6.0 L/hr)
110 V 110 V
8.2 psig (58.6 kPa)
1450 °F (787 °C)
13.5 gallons (51 L)
Direct Spark, Continuous
Igniter 13 kV, 10 ma
Solid State Control
2
3
4
5
5
8
11