Installing A Printer Driver Under Windows 98 Se Or Me - Siemens gigaset SE551 Owner's Manual

Installing a printer driver under Windows 98 SE or ME

The following section describes how to install a printer driver under the Windows 98 SE
or ME operating systems as the procedure and windows shown for these operating sys-
tems are very similar. The printer driver does not need to be installed on Windows XP
and 2000.
You have installed your network and it is ready for use.
ì
Insert the CD-ROM included in the scope of delivery into the CD-ROM or DVD drive
of your PC.
ì
Wait until the CD-ROM welcome window appears.
ì
Click on Gigaset SE551 WLAN dsl/cable.
ì
Click on Printer Port Driver for Windows 98 SE or ME.
The welcome window for installing the port driver is opened.
ì
Read the information it contains carefully.
ì
Click on Next.
The necessary files are copied to your PC and executed. Once all the data has been
transferred to your PC you are prompted to complete the installation of the port
driver.
ì
Click on Finish.
ì
Reboot your PC.
You have now installed the printer port and effectively installed an extra printer inter-
face in your PC.
You must carry out this installation on every PC with Windows 98 or ME that is to use
this printer in the network.
You might possibly still have to correct the IP address for the printer.
ì
Select Start – Settings – Printer, select the printer and right-click on the mouse to
open the pop-up menu.
ì
Select Properties and open the Details tab.
ì
Select the port and click on Connection Settings.
ì
Change the IP address if necessary. It must be the same as that for the Gigaset SE551
WLAN dsl/cable.
Installing the printer port for network printers
145