Table of Contents
Advertisement
!¡ Display window
Normally displays the input frequency. When you
press the MENU button, the menu appears.
When all the indicators flash, an error message
(ERROR-XX) appears. When the ALARM indicator
lights up, a warning message (0X WARNING)
appears.
!™ MENU button
Displays the menu in the display window. When you
press the MENU button, its back lighting lights up.
Press again to clear the menu. When the menu is
cleared, the back lighting for the MENU button turns
off.
For more information about the menu, see "Menu Setup"
(page 10).
!£ ENTER button
Saves the parameters in the current bank or memory
banks.
!¢ ITEM Â/µ buttons
Normally select the item which shows the status of the
input signal in the display window.
When the menu is displayed in the display window,
select the menu item.
!∞ Cursor (4/$/"/") buttons
Use the 4 or $ button to change the parameters.
Use the " or " button to move a digit to the left or
right.
!§ RESET button
Resets the unit to the status present when the power
has been turned on. Use a sharp-pointed object to
press this button.
7
Advertisement
Table of Contents
