Sony DSM-R1 Operating Manual page 9

5 SPARE connector (BNC type)
This connector is for future use.
6 L-BAND connector (BNC type)
INPUT: Inputs signals from a LNB (Low noise block
converter).
MONITOR OUT: Outputs IF signals to an IF
monitor such as a spectrum analyzer.
7 y (ground) jack
Connects to a ground wire.
8 BREAKER button
Excessive current in the internal circuitry, will trip the
primary circuit breaker, automatically cutting off the
power. After checking that the problem has been
corrected, press the BREAKER button to restore the
power again.
9 ~ AC IN socket
Connects to an AC power outlet using the optional AC
power cord. This socket accepts 100 to 240 V AC
power.
!º SDTI (Serial Data Transport Interface)
connector (BNC type)
Outputs digital video and audio signals in SDTI (SX)
format to the SDTI input connector on the DNW-
A100/A100P Digital Video Hybrid Recorder with the
optional BKNW-103 SDTI Input Kit, etc.
!¡ SDI (Serial Digital Interface) connector
(BNC type)
Outputs digital video and audio signals in SDI format
to the SDI input connector on the DVW-A500/A500P
Digital Video Cassette Recorder, etc.
!™ AUDIO (AES/EBU) connectors (BNC type)
Output 2-channel digital audio signals in AES/EBU
format to the AES/EBU audio input connectors on
external equipment.
CH 1/2: Outputs AES/EBU audio signals on
channels 1 and 2.
CH 3/4: Outputs AES/EBU audio signals on
channels 3 and 4.
!£ VIDEO connector (BNC type)
Outputs composite analog video signals to the video
input connector on the BVW-75/75P Video Cassette
Recorder, etc.
!¢ AUDIO connectors (XLR type, 3-pin, male)
Output analog audio signals (2 channels) to the audio
input connectors on the BVW-75/75P Video Cassette
Recorder, etc.
CH 1/3: Outputs analog audio signals on channel 1 or
3.
CH 2/4: Outputs analog audio signals on channel 2 or
4.
!∞ AUDIO connectors (XLR type, 5-pin, male)
Output analog audio signals (4 channels) to the audio
input connectors on the BVW-75/75P Video Cassette
Recorder, etc.
CH 1/2: Outputs analog audio signals on channel 1
and 2.
CH 3/4: Outputs analog audio signals on channel 3
and 4.
The 5-pin XLR type can be converted to the 3-pin
XLR (2 channels) with the optional CCXA-53 audio
cable.
9