Operation Warnings; Error Messages; Warning Messages - Sony DSM-R1 Operating Manual

When using the 5-pin XLR connector
Rear
BKSM-R103
Analog Output Board
VIDEO AUDIO
VIDEO
CH1/2 CH3/4
OUT ANALOG OUTPUT
AUDIO
CH1/2
1)
to analog
to analog
composite
audio input
video input
(channel 1 and 2)
BVW-75/75P Video Cassette
Recorder, etc.
1) With the 5-pin XLR connector, use the optional CCXA-53
conversion audio cable or the conversion adapter.
Setting a password
Set a password for the unit so that it matches that of
the DSM-T1. If the password of the unit does not
match that of the DSM-T1, the "PASSWORD
INCORRECT" warning message appears in the
display window of the unit and no audio/video signals
are output from the unit.
If the PASSWORD of the DSM-T1 is set to "OFF" in
the menu, this unit outputs the audio/video signals
regardless of the password of this unit.
For more information, see "Menu Setup" (page 10).
REF OUT
SPARE
L-BAND
SPARE
MONITOR INPUT
OUT
REF OUT
AUDIO CH3/4
1)
to analog
audio input
(channel 3 and 4)
to reference
video input

Operation Warnings

Error Messages

When a fault is detected by the self-diagnosis function
that automatically performs after the power is turned
on, all the indicators flash and an error message
(ERROR-XX) appears in the display window. The
indicator do not turn off until the power is turned off.
For more information about error messages, refer to the
Maintenance Manual.

Warning Messages

When a fault is detected while the unit is in operation,
the ALARM indicator flashes and a warning message
(0X WARNING) appears in the display window.
When the operation returns to normal, the ALARM
indicator turns off.
Use the list below to check the meaning of the warning
messages.
Warning Message
number
FAN (REAR)
01
STOP
FAN
02
(SW REG)
STOP
PASSWORD
03
INCORRECT
Meaning
The rear fan has stopped
running.
The internal fan has stopped
running.
The password of the unit does
not match that of the DSM-T1.
15