Locations And Functions Of Parts And Controls; Front Panel - Sony DSM-R1 Operating Manual

Locations and Functions of Parts and Controls

Front Panel

POWER
1
¬
1 POWER switch
Turns the power on and off.
2 PANEL INH (inhibiting panel buttons) indicator
and switch
Set the PANEL INH switch to ON to deactivate the
MENU, ENTER, ITEM Â/µ, and cursor (4/$/"/")
buttons.
When the PANEL INH switch is set to ON, the
PANEL INH indicator lights up.
3 OPTION (optional boards) indicators
OUT1 indicators
SDTI: Lights up when the BKSM-R101 SDTI
Output Board is installed in the OUT1 section of
the unit.
PANEL
SOURCE ANALOG VIDEO
INH
OPTION
SEL AUDIO STD
SDTI SDI ANALOG SOURCE1 SOURCE2 CH1/2 CH3/4
OUT1 525
OUT2 625
!¡ Display window
!™ MENU button
!£ ENTER button
!¢ ITEM Â/µ buttons
!∞ Cursor (4/$/"/") buttons
!§ RESET button
1 POWER switch
2 PANEL INH indicator and switch
3 OPTION indicators
4 SOURCE SEL indicators
5 ANALOG AUDIO indicators
6 VIDEO STD indicators
7 FREQ BW indicators
8 FEC RATE indicators
9 RF CONDITION indicators
!º ALARM indicator
FREQ FEC RF
BW RATE CONDITION ALARM
36M 7/8
18M 3/4
SDI: Lights up when the BKSM-R102 SDI Output
Board is installed in the OUT1 section of the
unit.
ANALOG: Lights up when the BKSM-R103 Analog
Output Board is installed in the OUT1 section of
the unit.
OUT2 indicators
SDTI: Lights up when the BKSM-R101 SDTI
Output Board is installed in the OUT2 section of
the unit.
SDI: Lights up when the BKSM-R102 SDI Output
Board is installed in the OUT2 section of the
unit.
ANALOG: Lights up when the BKSM-R103 Analog
Output Board is installed in the OUT2 section of
the unit.
MENU ITEM
ENTER
RESET
(Continued)
5