Connecting To The Internet - ZyXEL Communications MAX208M Quick Start Manual

• Place the MAX208M indoors in an area free of moisture and
excessive humidity and/or heat.
• Keep the MAX208M away from other wireless devices, cordless
phones, microwave devices, or radio transmitters as they may
interfere with its connections.
• Keep the MAX208M free of obstruction.

Connecting to the Internet

This section shows you how to connect to the Internet with your
MAX208M.
1. Check your MAX208M's WiMAX Link LED.
• If everything is connected properly and a WiMAX base station is
within range, then the WiMAX Link LED shines a steady green,
indicating a stable connection. The Strength Indicator LEDs will
turn on to show the signal strength as follows: LED 1 - low strength
signal; LEDs 1 and 2 - medium strength signal; LEDs 1, 2 and 3 -
high strength signal. If the signal strength is low or medium, you
can try to adjust the position of the device to increase the strength.
Go to step 2.
• If the WiMAX Link LED is blinking, then the MAX208M is
undergoing a self-test. If it turns a steady green shortly thereafter,
this indicates a stable connection. Go to step 2.
• If the WiMAX Link LED remains off or continues blinking, you will
not be able to connect. See the User's Guide for more
troubleshooting steps.
ENGLISH
7