Table of Contents
Advertisement
8. After going through the screens in the wizard, the process is
complete. Click the save button to save all your settings.
Troubleshooting
Use this section if you have problems with your WiMAX Modem.
I cannot access the WiMAX Modem from my LAN:
• Check the cable connection between the WiMAX Modem and your
computer or switch and ensure that both ends are secure.
• Make sure your computer has gotten an IP address (default is
192.168.1.x) in the same network as the MAX208M's LAN. If not,
you can manually configure your computer by clicking Start >
Control Panel > Network Connections > Local Area
Connection > Properties > Internet Protocol (TCP/IP).
• Ping the WiMAX Modem from a LAN computer: Click Start > (All)
Programs > Accessories > Command Prompt. When the
command prompt window opens, type "ping 192.168.1.1" without
quotes and press [ENTER]. The WiMAX Modem should reply.
• Press and hold the Reset button for about 10 seconds to reset the
device to its default factory settings, then try to connect to the IP
192.168.1.1 once more.
12
Advertisement
Table of Contents
