ACO ECOJET Installation Manual

Grease separator

Advertisement

ACO Passavant
Installation guide
ECOJET GREASE SEPARATOR
VERSION NO.
IMPLEMENTED BY
18
REVISION DATE
Kate Jennings
ACO, 134-140 Old Bathurst Road, Emu Plains, NSW 2750
Tel: +61 2 4747 4000
|
Fax: +61 2 4747 4029
REASON
17.07.2018
Water authority requirements consolidated
PA0013
V18
|
Email: sales@acoaus.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECOJET and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ACO ECOJET

  • Page 1: Installation Guide

    Installation guide ECOJET GREASE SEPARATOR VERSION NO. IMPLEMENTED BY REVISION DATE REASON Kate Jennings 17.07.2018 Water authority requirements consolidated PA0013 ACO, 134-140 Old Bathurst Road, Emu Plains, NSW 2750 Tel: +61 2 4747 4000 Fax: +61 2 4747 4029 Email: sales@acoaus.com.au...
  • Page 2: Table Of Contents

    ECOJET GREASE SEPARATOR - Installation guide Kate Jennings Contents GENERAL .............................. 3 SAFETY CONSIDERATIONS ......................3 SIZING ..............................4 INSTALLATION ..........................5 MAINTENANCE ..........................7 WATER AUTHORITY APPROVALS ..................... 7 CONTACT INFORMATION ......................8...
  • Page 3: General

    2.1 Site handling Inspect the EcoJet upon delivery and prior to installation, check for damage that may have occurred during transportation or at the job site prior to installation. Grease separators can be extremely large. To avoid damage to the grease separator, ensure that correct equipment (e.g.
  • Page 4: Sizing

    ECOJET GREASE SEPARATOR - Installation guide Kate Jennings 3 SIZING 3.1 Sizing The correct sizing and regular emptying of a grease separator is vital to its correct and on-going function.
  • Page 5: Installation

    Each separator is supplied with a sticker on each side identifying the separator and size. 4 INSTALLATION The EcoJet grease separator must be installed in compliance with local water authority regulations, Safework Australia and all other codes of practice. Prior to installation, ensure that the local water authority approves each installation.
  • Page 6 To fit the vent, use a hole saw to drill open the cap marked ‘vent’. ACO Passavant can be used in conjunction with a number of different pipe materials. Connecting pipes and pipe materials should be installed in accordance with AS/NZS 3500 and local plumbing codes.
  • Page 7: Maintenance

    6 WATER AUTHORITY APPROVALS Please refer to www.acopassavant.com.au/approvals for a list of the approved ACO grease separator water authority approvals. Some authorities have specicic requirements for applications within their catchment.
  • Page 8: Contact Information

    Kate Jennings separator by 100mm. Ensure two are installed with each grease separator – part number 3300.13.00. 7 CONTACT INFORMATION For queries, servicing assistance and spare parts, contact ACO. ACO Pty Ltd 134-140 Old Bathurst Road Emu Plains NSW 2750 Australia e: sales@acoaus.com.au...

Table of Contents