TC65 JAVA User's Guide
Strictly confidential / Released
4.4.2
Module State Transitions
State 1: Default, no Java
appl. running
close I2C
State 2: no Java appl.
running, using I2C
close SPI
open SPI
State 3: no Java appl.
running, using SPI
Note: No AT parser is available over serial interface ASC0 or ASC1 while a Java application
is running on the module. System.out is available on ASC1 for debugging while a Java
application is running.
TC65 JAVA User's Guide_V05
switch on
no Java autostart
start java: at^sjra
destroy java application
open I2C
destroy
Java application
destroy java application
start java: at^sjra
Figure 10: Module State Transition Diagram
Page 23 of 90
Java autostart
open I2C
start java:
State 5: Java active,
at^sjra
using I2C
State 6: Java active,
using SPI
s
State 4: Default,
Java active
close I2C
close SPI
open SPI
26.09.2005