Transferring Calls - Siemens HiPath 500 Operating Manual

Conducting calls – with multiple users
Step-by-Step
<Name>
> <
Start transfer?
> <
Transfer?
54
The override is established. The user name or phone
number, to whom/which the call has been transferred,
is displayed.
Override is ended when you hang up the handset.
Note:
During override
•
•

Transferring calls

Transferring a call means that you wish to hand over a
call you are conducting on your handset to another user.
Transferring
(without announcing the transfer)
p
You can use this function to forward a call which you an-
swered to another user.
Call the system menu.
Menu
[
Select and confirm the menu item.
The current call is placed "on-hold", so that the first user
waits.
o
Enter the phone number of the user to whom the call is
to be transferred.
p
The number is dialled.
either:
a
Press the On-hook key. The target user's phone rings.
He picks up the call by lifting the handset.
or:
Menu Call the system menu.
[
Select and confirm the menu item.
all users hear an override tone and every-
thing that is said,
all users see the following message on the
display "Override:....:".