System Appointment Function - Siemens HiPath 500 Operating Manual

Step-by-Step
> <
Service?
> <
*46=Timed reminder
on?
Remind at (HHMM):
> <
One time only?
> <
Daily?
> <
Service?

System appointment function

You can use your handset to enter a single appointment
for the next 24 hours or an appointment that recurs on
a daily basis.
When the appointment is due, your handset rings for
approx. 20 seconds to remind you of your appointment.
The entered appointment appears on the display. This
appointment call is deleted when you confirm it. Alter-
natively it is deleted automatically after it has been re-
peated 5 times at one minute intervals.
This function can also be called by entering the code
( page 88).
Entering an appointment
c
Press the Talk key.
Menu Call the system menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Enter the required time.
Note the required data format: Appointment at (HH-
MM); HH = two-digit hour setting mm = minutes, two
digits For example: 0905 for 9.05 (= 9.05 a.m.) or 1430
for 14.30 (= 2.30 p.m).
either:
[
Select a menu item.
or:
[
Select and confirm the menu item.
continue:
Save Save the settings.
a
Press the On-hook key to end the process.
Deleting/ checking entered appointments
c
Press the Talk key.
Menu Call the system menu.
[
Select and confirm the menu item.
Additional functions
81