Washing procedure and program selection
* DRUM CLEAN PROGRAM
1
2
3
NOTE
• Use this program WITHOUT load.
• The appropriate cleaning time is one time per a month.
• All washing temperatures are selectable with Drum Clean Program.
CAUTION
• If you select washing temperature '95' °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead
of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
DWC-ED1432(영)_CUTA(MALTA향).indd 21
Press the Power button.
• The LED shows only '- --' signal.
Select the 'Drum Clean' program using program selection dial.
• 'Soak' and spin '400' rpm and 'Cold' water temperature.
• Dry option 'Cup board' is selected automatically.
Press Start/Pause button.
• The washer will be operated with locking Door and supplying water.
(cont.)
E-21
E-21
2017-08-10 오후 3:11:06
Need help?
Do you have a question about the DWC-ED1432 and is the answer not in the manual?