Daewoo DWC-ED1432 Instruction Manual page 20

Washing procedure and program selection
* INTENSIVE PROGRAM
1
2
3
4
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and press
the button you want.
• All washing temperatures are selectable with Intensive program.
• 'Prewash', 'Rinse+' wash options are selectable with Intensive program.
CAUTION
• If you select washing temperature '95' °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead
of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
E-20 E-20
DWC-ED1432(영)_CUTA(MALTA향).indd 20
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash and prewash compartments in the detergent case.
Softener should be below the 'MAX' level.
• Put detergent into the prewash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
• The LED shows only '- --' and all Program Lights turn on.
Select the 'Intensive' program using program selection dial.
• Washing temperature '40' °C, spin '800' rpm are selected automatically.
• If you want to change washing temperature, the spin velocity or add wash options
(Prewash, Rinse+), press each button.
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
(cont.)
2017-08-10 오후 3:11:06