Belkin BUS STATION F5U100 User Manual page 9

Note: Modules should only be added starting from the
4 Port Hub base of the module working your way up.
1.
Remove the sleeve from the USB module following the instructions in
Figure 5.
2.
Place the module you wish to add in the first empty slot directly
above the 4 Port hub.
3.
Do not force the module into the BusStation
As you slide the module into the BusStation
onto the guide track of the one below it.
4.
Gently slide the module into the BusStation
solid click. (See Figure 6)
5.
The modules should fit evenly on top of one another.
6.
Follow the installation instructions of the USB module you attached
to the BusStation ™ .
7.
Your computer will instantly recognize that you connected a USB
device.
.
™
™ it should securely lock
™ bay until you hear a
Figure 6
Modules should
ONLY be ADDED
from BOTTOM to TOP
9