BusStation ™ MODELS F5U100, F5U100-BLU, F5U100-SLV, F5U100-ORG User Manual P73281...
Page 2
USB port module off the BusStation ™ you have room to snap in one of the many available Belkin USB modules, including SCSI ports, Ethernet ports, serial ports and more. Configure it to fit your own computing needs, build your own multifunction hub - because it’s USB, you don’t even have to...
Page 3
• Gives you the ability to configure your own multifunction hub or docking station to fit your own computing needs. • Works with the Belkin complete selection of modules that cover virtually every possible configuration. • Compatible with Windows ®...
Page 4
Belkin BusStation ™ Figure 1 • LEDs to indicate status Front View • DC 5V 4A power jack Back View • 3 Removable modules • Downstream ports • Root port...
® 95 Rev. B, Windows ® 98, Windows 8.1 or higher PACKAGE INCLUDES • Belkin BusStation ™ • USB Device Cable • 5 Volt 4 Amp power adapter • User Guide Installation 1. Attach the power adapter to the power jack of the BusStation ™...
Page 6
Installation (cont’d.) Figure 2 Figure 3 Adding Modules to the BusStation By adding modules to the BusStation custom-configured multi-function USB hub or docking station. You can add and subtract components from a complete selection of modules that cover virtually every possible configuration. Need Ethernet? Snap an Ethernet module in.
Page 7
Instructions for Adding Modules Removing the sleeve from the Belkin USB Module: Hold the module in both hands. Pull one side of the sleeve outward. (See Figure 5). The sleeve should slide off easily. Figure 5...
Page 8
Instruction for Adding Modules (cont’d.) When attaching additional modules to the BusStation ™ , there is no need to power down your computer, or unplug the BusStation ™ Note on Power Consumption USB specifies that each port can only draw a maximum of 500mA of electrical current.
Page 9
Note: Modules should only be added starting from the 4 Port Hub base of the module working your way up. Remove the sleeve from the USB module following the instructions in Figure 5. Place the module you wish to add in the first empty slot directly above the 4 Port hub.
Removing Modules Instructions for removing modules from the BusStation Note: Modules should be removed from top to bottom. Do not remove the middle modules first, doing so will cause severe damage to your equipment and/or the BusStation ™ Hold the BusStation ™...
• USB Serial Adapter • USB Serial Adapter with colored sleeves • USB Ethernet Adapter • USB SCSI Adapter Belkin USB modules are continuously being developed. Visit our website for additional modules. The possibilities are endless... Seven port Two serial and...