Usb mass storage disk for windows operating systems win98se, winme, win2k and winxp (9 pages)
Summary of Contents for Belkin USB 2.0 FLASH DRIVE
Page 1
USB 2.0 Flash Drive User’s Manual Easy data access; Manuals and/or Software are available in your local language: transfer data Les manuels et/ou le logiciel sont disponibles en français : from one Benutzerhandbuch und/oder computer to Software gibt es in Ihrer Sprache: Voor Nederlandstalige handleidingen another.
Page 2
USB 2.0 Flash Drive User’s Manual Easy data access; YEAR transfer data from one WARRANTY computer to another. Features Password protection F5U126eaXXX...
Introduction Thank you for purchasing the Belkin USB Flash Drive. The manual explains how to use the Belkin software bundled with the device. Safety Precautions Please follow the safety precautions carefully before you use the Belkin USB Flash Drive and the application software. Make sure that you use the application software correctly according to the procedures described in this guide.
- The product can use the default driver in most of the OS. If you want to run the application software bundled with the product (“Belkin U-Storage “), install the driver by clicking on the “Tools” in the “Driver & Tools Installation” menu. Then, the application software (“Belkin U-Storage”) will work properly.
Guide to Components USB interface LED Display USB Interface: - The interface connects to the USB port of the computer. LED Display: - This LED Display will show the status of the device. Once the device is in operation, the LED will be turned on.
When you plug the device into the USB port of your computer, you will see a “Removable Disk” icon in the file manager window. In Macintosh, once you plug the Belkin USB Flash Drive into the USB port. You can see the disk icon in the “Desktop”.
Page 8
Basic Functions 2. Read and Write You can retrieve files from or store files in the device as you do with a hard disk. The read/write operation of the device is the same as that of a hard disk. 3. Write-Protect Switch When you turn the write-protect switch to “ON”...
Page 9
Basic Functions Warnings: When you want to remove the Belkin USB Flash Drive, make sure the LED is not flashing. When the LED flashes quickly, there are some traffic on going between the OS and the Belkin USB Flash Drive. Don’t remove the Belkin USB Flash Drive at this moment.
Partition Type The Belkin USB Flash Drive may be partitioned into three types of disk. We will use the following terms in this guide, 1. Public Area There is an area where you , as well as anyone else can do any basic functions, described in the “Basic Functions”...
Page 11
Partition Type Public Security Drive1 Area Area Change View Through Login & Logout This figure shows detailed operations of single Drive. Public Security Drive1 Area Area Change View Through Login & Logout Public Drive2 Area This figure shows detailed operations of multiple Drives. Function Type Security Password...
Microsoft Windows XP, you have to install the Belkin 98/SE Driver again as you plug in the device. • In Windows 98 SE and Win Me, you need to unplug the Belkin USB Flash Drive and plug again after install the driver.
Page 13
Using “Belkin U-Storage” Program for the First Time: Warnings: Because the “Belkin U-Storage” program can only handle one Belkin USB Flash Drive at the same time. If you don’t want to use the functions of the “Belkin U-Storage”, like [Resize], [Change Password], or [Log In], etc., you can insert more than two Belkin...
Page 14
• You can use the right button of your mouse to pop up the selection menu as the following figures. Then, you can select the functions you want. • Or you can double click the icon in the notification window. The “Belkin U- Storage” manager window will pop up :...
Page 15
files or data. Also, please close all the active programs and windows on the screen of your computer. 1. Click the [Resize] button in the “Belkin U-Storage” manager window. The following “Resize Partition” window pop up. 2. Select the partition type you want.
Page 16
Using the Software (Belkin U-Storage) On Windows Platform 4. If you select the “Public Area + Security Area (Single Drive)”, then the following “Security Area” window will pop up. You can drag the scroll bar in the middle of the window to set the size of the “Public Area” and “Security Area”. Or you can type in the size of each Zone you want in the “Size”...
Page 17
Using the Software (Belkin U-Storage) On Windows Platform 5. If you select the “Public Area + Security Area(Dual Drive)”, then the following “Public Area(Drive1)/Security Area” window will pop up. You can drag the scroll bar in the window to set the size of each area. First, please set the size of the “Public Area (Drive2)”.
Page 18
“Tools.exe” in the “Driver & Tools” CD ) will be copied into the “Public Area (Drive1)” automatically. It’s removable. However, it is needed when you insert your device into another computer. It will install the “Belkin U-Storage” software for you in the computer you want to operate on.
Page 19
If you partition the device with security, you can execute the following “Login” function to access the security Area. 1. Double click the “Belkin U-Storage” icon in the notification window or click the [Login] button in the “Belkin U-Storage” manager window. The “Unlock Protect”...
Page 20
Using the Software (Belkin U-Storage) On Windows Platform - If you key in the wrong password, the following message will be shown. -You have three tries to input the password. After three tries, the following message will pop up. And you have to unplug and plug the device again in order to do future actions.
Page 21
“Security Area”. The file manager window looks like this : Log out the Security Data Zone: 1. Double click the “Belkin U-Storage” icon in the notification window or select the [Logout] button in the “Belkin U-Storage” manager window.
Page 22
” pops up, you can do the operation you want with the Public Area. Change Password: User can change password and key in the password hint using the “Change Password” selection in the “Belkin U-Storage” manager menu. You can only select this item in “Security AP Zone”.
Page 23
Using the Software (Belkin U-Storage) On Windows Platform 1 Make sure the “Write Protect” switch is in “OFF” position. 2 Key in your current password in the “Current Password” area. 3 Then, key in your new password and confirm in the “Confirm Password” area.
7 If you want to make your device as a bootable USB HDD, you can’t make the device as a “Security” one. This option is only supported in Windows 98 SE. Warnings: If you performed the “Log In” action with your Belkin USB Flash Drive and located in “Security Area” and run the BootUp function, it will do the “Log Out”...
Page 25
USB HDD is only for Windows 98. - If you select “USB HDD”, the computer will get the “C:\>” prompt after you boot from the Belkin USB Flash Drive. - If you select “USB ZIP”, the computer will get the “A:\>”...
Page 26
4 Copy all the files in the floppy to the XP_Bootable directory. 5 Click on the [Utility] button in the “Belkin U-Storage” manager window. Then, select the USB ZIP. Click on the [OK] button. 6 After the process is completed, the finish message will be shown.
Please don’t remove any files in this area. Otherwise it will cause failure when you do the boot-up procedure of your computer. • When you want to use the Belkin USB Flash Drive to boot up your computer, please select the appropriate setting of the BIOS.
1 After you double click on the Recover Disk shortcut in start menu, the following window will pop up. Warnings: The “Recover Disk” action will erase all the data or files existing in Belkin USB Flash Drive. The action is not reversible. You have to backup all the important files or data.
“Write-Protect” on-line. Problem 2: In Window2k or Window XP, when user use VIA USB 2.0 host controller and run resize in Belkin USB Flash Drive AP will cause OS reboot or resize function fail. Solution: In Windows XP: Update USB 2.0 driver from Microsoft Windows...
Page 30
Known Problems Select Device Manager… in Hardware page Select VIA PCI to USB Enhanced Host Controller under Universal Serial Bus controllers and click right mouse button to select Properties. Then select Update Driver… in Driver page.
Page 31
Known Problems Press Next. Select Search for a suitable driver for my device (recommended).
Page 32
Known Problems Then select Microsoft Windows Update to update driver. In Windows 98 and Windows ME: Please update VIA driver to V2.42 or higher from VIA website to prevent above issues. If user uses other manufacturer’s USB 2.0 card and occur this issue, follow the same step to update USB 2.0 driver or connect USB card manufacturer for solution.
Page 33
In Windows XP, when user uninstall Belkin USB Flash Drive, it may cause Belkin 98/SE Driver not to be removed in VIA USB 2.0 host controller, but this situation will not take any bad effect to use device. After user reboot OS,...
We made every effort to ensure that the information and procedure in this guide is accurate and complete, no liability can be accepted for any errors or omissions. The controller manufacturer of this Belkin USB Flash Drive, Ours Technology Inc. (OTI) reserves the right to make any changes without further...
Trademark Acknowledgments • IBM is a registered trademark of international Business Machines Corporation. • iBook and iMac are trademarks of Apple Computer, Inc. • Macintosh, PowerBook, Power Macintosh are trademarks of Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000, and Windows XP are either registered trademarks of Microsoft Corporation in the United Stats and/or other countries.
Page 37
Lecteur Flash USB 2.0 Manuel De L’utiIisateur Accès aux données facile; permet de transférer DE GARANTIE données d’un ordinateur à l’autre. Accés sécurisé avec un mot de passe F5U126eaXXX...
Page 38
Section 4. Fonctions de base Page 6-8 Section 5. Type de partition Page 9-10 Section 6. Utilisation du logiciel U-Storage de Belkin sous la plate-forme Windows Page 11-22 Section 7. Fonction de démarrage Page 23-26 Section 8. Restauration du disque Page 27 Section 9.
Introduction Merci d’avoir choisi le lecteur Flash USB de Belkin. Ce manuel vous explique comment utiliser le logiciel Belkin fourni avec ce périphérique. Consignes de sécurité Veuillez suivre rigoureusement les consignes de sécurité avant d’utiliser le lecteur Flash USB de Belkin et l’application logicielle. Assurez-vous d’utiliser celle-ci correctement, conformément aux procédures décrites dans ce guide.
Page 40
« U-Storage » de Belkin fonctionnera alors correctement. - L’application logicielle « U-Storage » de Belkin peut SEULEMENT fonctionner sous Microsoft Windows. - Toutefois, les fonctions de base du lecteur Flash USB de Belkin sont prises en charge par tous les systèmes d’exploitation mentionnés ci-dessus.
Guide des composants Interface USB Voyant lumineux Interface USB : - L’interface connecte le port USB à l’ordinateur. Voyant lumineux : - Ce voyant lumineux indique l’état du périphérique. Dès que celui-ci fonctionne, le voyant lumineux s’allume.
« Removable Disk » (Disque amovible) dans la fenêtre du gestionnaire de fichiers. Si vous utilisez Macintosh, lorsque vous avez connecté le lecteur Flash USB de Belkin au port USB, vous apercevez l’icône du disque sur le bureau.
Page 43
Fonctions de base 2. Lecture et écriture Vous pouvez extraire les fichiers ou les stocker sur le périphérique comme vous le faites avec un disque dur. Le périphérique exécute la lecture et l’écriture de la même façon qu’un disque dur. 3.
Page 44
Fonctions de base Avertissement: Avant de supprimer le lecteur Flash USB de Belkin, assurez- vous que le voyant lumineux ne clignote pas. Si le voyant lumineux clignote rapidement, cela signifie que le système d’exploitation et le lecteur Flash USB de Belkin sont en communication.
Type de partition Le lecteur Flash USB de Belkin peut être partitionné en trois types de disque. Les termes suivants sont fréquemment utilisés dans ce guide : 1. Zone publique Zone dans laquelle vous pouvez, ainsi que n’importe qui d’autre, exécuter les fonctions de base décrites dans le chapitre «...
Page 46
Partition Type Public Security Drive1 Area Area Change View Through Login & Logout La figure suivante détaille les fonctions du lecteur unique. Public Security Drive1 Area Area Change View Through Login & Logout Public Drive2 Area Le tableau suivant détaille les fonctions des lecteurs multiples. Type de Sécurité...
• Si vous ne connectez pas le périphérique au port USB et si vous installez l’application logicielle sous Windows XP de Microsoft, vous devez réinstaller le pilote 98/SE de Belkin au moment où vous connectez le périphérique. • Sous Windows 98 SE ou Windows ME, vous devez déconnecter le lecteur Flash USB de Belkin et le reconnecter après avoir installé...
Page 48
Avec certains systèmes Windows, les utilisateurs doivent se connecter en tant qu’administrateur avant de procéder à l’installation. Sous Windows ME, 2000 ou XP, dès que vous avez inséré le lecteur Flash USB de Belkin dans votre ordinateur, le système d’exploitation trouve le pilote approprié...
Page 49
Vous pouvez ensuite sélectionner les fonctions que vous souhaitez. • Vous pouvez aussi cliquer deux fois sur l’icône figurant dans la zone de notification. La fenêtre du gestionnaire du programme « U-Storage » de Belkin apparaît :...
Page 50
1. Cliquez sur le bouton [Resize] (Redimensionner) de la fenêtre du gestionnaire du programme « U-Storage » de Belkin. La fenêtre de redimensionnement de la partition apparaît comme suit. 2. Sélectionnez le type de partition que vous souhaitez.
Page 51
Utilisation du logiciel U-Storage de Belkin sous la plate-forme Windows 4. Si vous sélectionnez “Public Area + Security Area (Single Drive)” [Zone publique + Zone de sécurité (Lecteur unique)], la fenêtre « Security Area » suivante apparaît. Vous pouvez faire glisser la barre de défilement située au milieu de la fenêtre pour dimensionner la taille de la zone publique et de la zone de sécurité.
Page 52
Utilisation du logiciel U-Storage de Belkin sous la plate-forme Windows 5. Si vous sélectionnez « Public Area + Security Area (Dual Drive) » [Zone publique + Zone de sécurité (Lecteur double)], la fenêtre « Public Area(Drive1)/Security Area » [Zone publique (Lecteur 1)/Zone de sécurité] apparaît.
Page 53
(Pilote et outils) est automatiquement copié dans la « Public Area (Drive1) » [Zone publique (Lecteur 1)]. Il peut être supprimé. Cependant, vous en aurez besoin lorsque vous insérerez votre périphérique dans un autre ordinateur. Il se chargera d’installer le logiciel « U-Storage » de Belkin sur l’ordinateur que vous souhaitez utiliser.
Page 54
« Login »(Connexion) suivante pour accéder à cette zone. 1. Cliquez deux fois sur l’icône du programme « U-Storage » de Belkin qui se trouve dans la fenêtre de notification ou sur le bouton [Login] (Connexion) de la fenêtre du gestionnaire du programme «...
Page 55
Utilisation du logiciel U-Storage de Belkin sous la plate-forme Windows - Si vous entrez un mot de passe erroné, le message suivant s’affiche. -Vous avez droit à trois tentatives de saisie du mot de passe. Après la troisième tentative, le message suivant apparaît. Vous devez alors déconnecter et reconnecter le périphérique pour pouvoir exécuter...
Page 56
fichiers se présente comme suit : Déconnexion de la zone de sécurité : 1. Cliquez deux fois sur l’icône du programme « U-Storage » de Belkin dans la fenêtre de notification ou sélectionnez le bouton [Logout] (Déconnexion)
Page 57
L’utilisateur peut changer son mot de passe et saisir l’aide-mémoire au moyen de la sélection « Change Password » (Changer le mot de passe) du menu du gestionnaire du programme « U-Storage » de Belkin. Vous pouvez uniquement sélectionner cet élément dans « Security AP Zone ».
Page 58
Utilisation du logiciel U-Storage de Belkin sous la plate-forme Windows 1 Assurez-vous que l’interrupteur de protection contre l’écriture « Write Protect » est sur la position « OFF » (Arrêt). 2 Saisissez votre mot de passe actuel dans la zone «...
5 Ce programme ne peut tourner que sur un seul périphérique à la fois. 6 Assurez-vous que le lecteur Flash USB de Belkin est dans la « Public Area » (Zone publique) s’il est utilisé avec la fonction « Security » (Sécurité).
Page 60
- Si vous sélectionnez « USB HDD », l’ordinateur obtient l’invite « C:\> » après que vous avez effectué le démarrage à partir du lecteur Flash USB de Belkin. - Si vous sélectionnez « USB ZIP », l’ordinateur obtient l’invite « A:\> » après que vous avez effectué...
Page 61
Bootable ». 5 Cliquez sur le bouton [Utility] (Utilitaire) de la fenêtre du gestionnaire du programme « U-Storage » de Belkin. Ensuite, sélectionnez l’option USB ZIP. Cliquez sur le bouton [OK]. 6 Après l’exécution complète du processus, le message de fin apparaît.
Page 62
Ne supprimez pas les fichiers de cette zone sinon, la procédure de démarrage de votre ordinateur va échouer. • Si vous souhaitez utiliser le lecteur Flash USB de Belkin pour démarrer votre ordinateur, veuillez sélectionner le paramètre BIOS approprié.
Avertissement: L’exécution de « Recover Disk » (Restauration du disque) efface toutes les données et tous les fichiers se trouvant sur le lecteur Flash USB de Belkin. Cette action ne peut pas être annulée. Vous devez donc faire une copie de sauvegarde de toutes les données et de tous les fichiers importants.
Sous Window XP, Window 2K, Window 98 ou Windows ME, si vous utilisez le contrôleur d’hôte VIA USB 2.0 et si vous exécutez le redimensionnement sur le lecteur Flash USB de Belkin, le point d’accès fait redémarrer le système d’exploitation et le redimensionnement échoue.
Page 65
Problèmes courants Cliquez sur le menu contextuel My Computer (Poste de travail) et sélectionnez Properties (Propriétés). Sélectionnez Device Manager… (Gestionnaire de périphériques) à la page Hardware (Matériel). Sélectionnez VIA PCI to USB Enhanced Host Controller (VIA PCI vers Contrôleur d’hôte USB amélioré) sous Universal Serial Bus controllers (Contrôleurs de bus USB) et cliquez avec le bouton droit de la souris pour sélectionner Properties (Propriétés).
Page 66
Problèmes courants Sélectionnez ensuite Update Driver… (Mettre le pilote à jour) à la page Driver (Pilote). Cliquez sur « Next » (Suivant).
Page 67
Problèmes courants Sélectionnez l’option « Search for a suitable driver for my device (Recommended) » (Rechercher un meilleur pilote que celui que vous utilisez en ce moment (Recommandé). Sélectionnez ensuite Microsoft Windows Update pour mettre le pilote à jour.
Page 68
Problème 3: Sous Windows XP : Lorsque l’utilisateur désinstalle le lecteur Flash USB de Belkin, il se peut que le pilote de Windows 98/SE ne soit pas supprimé du contrôleur d’hôte VIA USB 2.0. Ceci n’a aucune conséquence négative sur l’utilisation du périphérique ou sur le système. Après que l’utilisateur a redémarré...
Page 69
; toutefois, nous ne pouvons être tenus responsables en cas d’erreurs ou d’omissions. Le fabricant du contrôleur du lecteur Flash USB de Belkin, Ours Technology Inc. (OTI), se réserve le droit d’apporter sans préavis des modifications aux produits mentionnés aux présentes.
Marques de commerce • IBM est une marque déposée d’International Business Machines Corporation. • iBook et Mac sont des marques de commerce d’Apple Computer, Inc. • Macintosh, PowerBook et Power Macintosh sont des marques de commerce d’Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000 et Windows XP sont des marques déposées de Microsoft Corporation aux Etats-Unis et/ou dans d’autres pays.
Page 72
USB 2.0 Flash-Laufwerk Benutzerhandbuch Einfacher Zugang zu Daten; JAHRE Datenübertragung GARANTIE Computer zu Computer. Passwort Schutzt F5U126eaXXX...
Einführung Vielen Dank für den Kauf des Belkin USB Flash-Laufwerks. In diesem Handbuch wird die mit dem Gerät gelieferte Software erläutert. Sicherheitshinweise Beachten Sie bitte die Sicherheitshinweise, bevor Sie das USB Flash-Laufwerk von Belkin benutzen. Verwenden Sie die Software genauso, wie es in diesem Handbuch beschrieben ist.
Menü “Driver & Tools Installation” (Treiber- und Programminstallation) auf “Tools” (Programme) klicken. Die Software (“Belkin U-Storage”) arbeitet dann einwandfrei. - Die Software (“Belkin U-Storage”) kann NUR unter Microsoft Windows ausgeführt werden. - Die Grundfunktionen des Belkin USB Flash- Laufwerks werden jedoch von allen oben genannten...
Erläuterung der Komponenten USB-Schnittstelle LED-Anzeige USB-Schnittstelle : -An der Schnittstelle werden USB-Geräte am Computer angeschlossen. LED-Anzeige : - Diese LED-Anzeige zeigt den Status des Geräts an. Wenn das Gerät in Betrieb ist, leuchtet die Anzeige.
Grundfunktionen 1. Plug and Play Wenn Sie das Gerät in den USB-Port des Computers stecken, wird ein Symbol („Austauschmedium“) für das Gerät im Dateimanager angezeigt. Bei Macintosh-Computern wird das Symbol auf dem Desktop angezeigt. Mit Linux-Systemen können Sie das Gerät folgendermaßen nutzen: •...
Page 78
Grundfunktionen 2. Lesen und Schreiben Sie können Dateien wie von einer Festplatte aufrufen und speichern. Die Lese-/Schreibe-Funktion des Geräts ist dieselbe wie bei einer Festplatte. 3. Schreibschutz-Schalter Wenn Sie den Schreibschutz auf die Position „ON“ (AN) einstellen, können keine Ordner oder Dateien auf das Gerät geschrieben werden. Sie können die Ordner und Dateien aber noch immer aufrufen und lesen.
Page 79
Grundfunktionen Warnung: Wenn Sie das Belkin USB Flash-Laufwerk entfernen möchten, darf die LED-Anzeige nicht blinken. Wenn die LED-Anzeige schnell blinkt, werden aktuell Daten zwischen dem Betriebssystem und dem Flash- Laufwerk ausgetauscht. Entfernen Sie das Laufwerk nicht in diesem Moment. Die Daten oder das Gerät selbst könnten in diesem Fall beschädigt werden.
Partitionsart Das Belkin USB Flash-Laufwerk kann in drei verschiedene Speicherarten partitioniert werden. In diesem Handbuch verwenden wir die folgenden Begriffe: 1. Offener Bereich Es gibt einen Bereich, in dem Sie, wie auch jeder andere, die Grundfunktionen bedienen können, die im Abschnitt „Grundfunktionen“...
Page 81
Partitionsart Sicherheitsbereich Offener Laufwerk 1 Ansicht durch An- und Bereich Abmelden ändern Diese Abbildung gibt die genauen Vorgänge eines Einzellaufwerks wieder. Sicherheitsbereich Offener Laufwerk 1 Ansicht durch An- und Bereich Abmelden ändern Offener Laufwerk 2 Bereich Diese Abbildung gibt die genauen Vorgänge eines Mehrfachlaufwerks wieder.. Funktionsart Sicherheit Kennwort...
Sie die Software installieren. • Wenn das Gerät bei der Installation unter Windows XP nicht mit dem Computer verbunden ist, müssen Sie den Belkin 98/SE-Treiber erneut installieren, wenn Sie das Gerät anschließen. • Unter Windows 98 SE und Windows Me, müssen Sie das Flash- Laufwerk entfernen und nach der Installation des Treibers wieder anschließen.
Page 83
Gerät zum ersten Mal über einen USB-Port mit einem Computer unter Windows 98/98SE verbunden ist. Die Treiberinstallation ist danach nicht mehr notwendig. • Brechen Sie die Installation nicht ab. Das Belkin USB Flash-Laufwerk wird unter Umständen nicht richtig funktionieren, wenn die Installation nicht beendet wurde.
Page 84
Diese Anzeige gibt den Status des Geräts wieder. • Sie können über die rechte Maustaste das Auswahlmenü wie folgt anzeigen lassen. Wählen Sie dann nach Wunsch eine Funktion aus. • Oder Sie klicken doppelt auf das Symbol. Das Verwaltungsfenster „Belkin U- Storage” wird angezeigt:...
Page 85
Sie sollten vorher eine Sicherheitskopie aller wichtigen Daten oder Dateien anlegen. Bitte schließen Sie zuvor alle Programme und offenen Fenster. 1. Klicken Sie im Fenster “Belkin U-Storage” auf die Schaltfläche „Resize“ (Größe ändern). Das folgende Fenster wird geöffnet. 2. Wählen Sie den Partitionstyp aus.
Page 86
Verwenden der Software (Belkin U-Storage) auf Windows-Plattformen 4. Wenn Sie “Public Area + Security Area (Single Drive)” (Offener Bereich + Sicherer Bereich – Ein Laufwerk) auswählen, wird das folgende Fenster “Sicherer Bereich” geöffnet. Sie können die Bildlaufleiste in der Mitte des Fensters verwenden, um die Größe der Bereiche einzustellen.
Page 87
Verwenden der Software (Belkin U-Storage) auf Windows-Plattformen 5. Wenn Sie “Public Area + Security Area (Dual Drive)” (Offener Bereich + Sicherer Bereich – Zwei Laufwerke) auswählen, wird das folgende Fenster “Public Area(Drive1)/Security Area” (Offener Bereich[Laufwerk1]/Sicherer Bereich) geöffnet. Sie können die Bildlaufleiste im Fenster verwenden, um die Größe für jeden Bereich einzustellen.
Page 88
Programm “Tools.exe” auf der CD “Driver & Tools”) automatisch in den Offenen Bereich (Laufwerk1) kopiert. Es kann gelöscht werden. Es wird jedoch benötigt, um Ihr Gerät mit einem anderen Computer zu verbinden. Es wird dann die Software “Belkin U-Storage” auf dem Computer installieren.
Page 89
Wenn Sie das Gerät mit einem Sicheren Bereich partitionieren möchten, können Sie die folgenden Anmeldefunktion ausführen, um auf den Sicheren Bereich zuzugreifen. 1. Klicken Sie im Meldefenster doppelt auf das Symbol “Belkin U-Storage” oder klicken Sie im Verwaltungsfenster auf die Schaltfläche „Login“ (Anmelden). Das Fenster “Unlock Protect” (Sperrschutz) wird angezeigt.
Page 90
Verwenden der Software (Belkin U-Storage) auf Windows-Plattformen - Wenn Sie ein falsches Kennwort eingeben, wird die folgende Mitteilung angezeigt. -Sie haben drei Versuche, um das richtige Kennwort einzugeben. Nach drei Versuchen wird das folgende Fenster angezeigt. Sie müssen das Gerät nun entfernen und wieder anschließen, um weiter zu arbeiten.
Page 91
4. Sobald im Dateimanager der „Sichere Bereich“ angezeigt wird, können Sie die gewünschten Vorgänge ausführen. Das Fenster des Dateimanagers sieht folgendermaßen aus: Vom Sicheren Bereich abmelden: 1. Klicken Sie im Meldefenster doppelt auf das Symbol “Belkin U-Storage” oder klicken Sie im Verwaltungsfenster auf die Schaltfläche „Logout“ (Abmelden).
Page 92
Sie die gewünschten Vorgänge ausführen. Kennwort ändern: Sie können das Kennwort und den Kennworthinweis ändern, indem Sie die Funktion “Change Password” (Kennwort ändern) im Verwaltungsmenü von “Belkin U-Storage wählen. Sie haben darauf nur im „Sicheren Bereich“ Zugriff.
Page 93
Verwenden der Software (Belkin U-Storage) auf Windows-Plattformen 1 Der Schreibschutz-Schalter muss sich in der Position „OFF“ (AUS) befinden. 2 Geben Sie Ihr aktuelles Kennwort in das Feld “Current Password” (Aktuelles Kennwort) ein. 3 Geben Sie dann Ihr neues Kennwort ein und bestätigen Sie dies im Feld „Confirm Password”...
4 Der Schreibschutz-Schalter muss sich in der Position „OFF“ (AUS) befinden. 5 Mit diesem Programm kann immer nur ein Gerät zugleich verwaltet werden. 6 Das Belkin USB Flash-Laufwerk muss im „Offenen Bereich“ zugänglich sein. 7 Wenn Sie das Gerät als startfähigen USB-Datenträger (USB HDD) nutzen möchten, kann es nicht „abgesichert“...
Page 95
HDD gilt nur für Windows 98. - Wenn Sie „USB HDD“ auswählen, gibt der Computer nach dem Start vom Belkin USB Flash-Laufwerk die Eingabeaufforderung “C:\>” an. - Wenn Sie „USB ZIP“ auswählen, gibt der Computer nach dem Start vom Belkin USB Flash-Laufwerk die Eingabeaufforderung “A:\>” an.
Page 96
Stammverzeichnis Ihrer Systempartitur. 4 Kopieren Sie die Dateien von der Diskette in das Verzeichnis „XP_Bootable”. 5 Klicken Sie im Fenster “Belkin U-Storage” auf die Schaltfläche „Utility“ (Hilfsprogramm). Wählen Sie USB ZIP aus. Klicken Sie auf “OK”. 6 Nach dem Vorgang wird die folgende Mitteilung angezeigt.
Page 97
Bereich keine Dateien. Sie könnten dann mit dem Laufwerk keinen fehlerfreien Start Ihres Computers mehr ausführen. • Wenn Sie das Belkin USB Flash-Laufwerk nutzen möchten, um den Computer zu starten, wählen Sie bitte die entsprechenden Einstellungen im BIOS aus. Weitere Informationen hierzu finden Sie im Benutzerhandbuch für die Platine (Motherboard).
Startmenü. Das folgende Fenster wird angezeigt. Warnung : Der Befehl „Recover Disk“ (Wiederherstellungsdiskette) löscht alle Daten oder Dateien auf dem Belkin USB Flash-Laufwerk. Dieser Vorgang ist nicht rückgängig zu machen. Sie sollten vorher eine Sicherheitskopie aller wichtigen Daten oder Dateien anlegen.
Bekannte Probleme Problem 1: Der Schreibschutz-Schalter funktioniert unter Mac OS 10.1.4 nicht online. Warnung : Wenn Sie den Schreibschutz online unter Mac OS 10.1.4 betätigen, führt dies zu einem Systemabsturz beim Schreiben oder Lesen. Umgehung des Problems: Entfernen Sie das Gerät, wenn Sie unter Mac OS 10.1.4 den Schreibschutz aktivieren möchten.
Page 100
Bekannte Probleme Klicken Sie mit der rechten Maustaste auf das Symbol Arbeitsplatz, und wählen Sie Eigenschaften. Klicken Sie auf der Seite Hardware auf Geräte-Manager. Wählen Sie unter Universal Serial Bus controllers den Eintrag VIA PCI to USB Enhanced Host Controller aus und klicken Sie mit der rechten Maustaste auf Eigenschaften...
Page 101
Bekannte Probleme Wählen Sei dann auf der Treiber-Seite den Eintrag Treiber aktualisieren. Klicken Sie auf “Weiter”.
Page 102
Bekannte Probleme Wählen Sie die Option Nach einem passenden Treiber für das Gerät suchen (empfohlen). Wählen Sie dann Microsoft Windows Update, um den Treiber zu aktualisieren.
Page 103
2.0-Treiber oder wenden Sie sich zur Problemlösung an den Hersteller. Problem 3: Windows XP: Wenn Sie das Belkin USB Flash-Laufwerk deinstallieren, kann es sein, dass die Windows 98/SE-Treiber im VIA USB 2.0-Host-Controller nicht entfernt werden. Dies wirkt sich auf das System nicht negativ aus. Nach einem Neustart des Systems, werden die Windows 98/SE-Treiber wieder auf die Microsoft-Standardwerte eingestellt.
Angaben in dieser Gebrauchsanweisung zutreffend und zuverlässig sind. Für Fehler oder Auslassungen übernehmen wir keine Verantwortung. Der Hersteller dieses Belkin USB Flash-Laufwerks, Ours Technology Inc. (OTI) behält sich das Recht vor, Änderungen an jedem Produkt ohne vorherige Ankündigung vorzunehmen.
Handelsmarken • IBM ist ein eingetragenes Warenzeichen der International Business Machines Corporation. • iBook und Apple sind Marken der Apple Computer, Inc. • Macintosh, PowerBook, Power Macintosh sind Marken der Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000 und Windows XP sind eingetragene Warenzeichen der Microsoft Corporation in den Vereinigten Staaten und/oder anderen Ländern.
Page 107
USB 2.0 Flash Drive Handleiding Eenvoudig toegang tot uw JAAR gegevens; datatransmissie GARANTIE van computer naar computer. Wachtwoord- beveiliging F5U126eaXXX...
Page 108
Overzicht van componenten Pagina 5 Hoofdstuk 4. Basisfuncties Pagina 6-8 Hoofdstuk 5. Partitietype Pagina 9-10 Hoofdstuk 6. De software gebruiken (Belkin U-Storage) op het Windows-platform Pagina 11-22 Hoofdstuk 7. Opstartfunctie Pagina 23-26 Hoofdstuk 8. Disk herstellen Pagina 27 Hoofdstuk 9.
Page 109
Inleiding Wij danken u hartelijk voor uw aankoop van de Belkin USB Flash Drive. Deze handleiding legt u uit hoe u de Belkin software gebruikt die bij dit apparaat wordt geleverd. Veiligheidsmaatregelen Houd u stipt aan de veiligheidsmaatregelen voordat u de Belkin USB Flash Drive en de applicatiesoftware in gebruik neemt.
Page 110
‘Tools’ (Hulpprogramma’s) te klikken. Vervolgens moet de applicatiesoftware (‘Belkin U-Storage’) onberispelijk werken. - De applicatiesoftware (‘Belkin U-Storage’) draait ALLEEN onder Microsoft Windows OS. - De basisfuncties van de Belkin USB Flash Drive kunnen echter door alle hierboven vermelde besturingssystemen worden ondersteund.
Page 111
Overzicht van componenten USB-interface Led-display USB-interface: - De interface wordt aangesloten op de USB-poort van de computer. Led-display: - Deze led-display geeft de status van het apparaat aan. De led-display wordt geactiveerd zodra het apparaat wordt ingeschakeld.
Page 112
‘File Manager’ (Bestandsbeheer) een ‘Removable Disk’ (Verwisselbare schijf)-pictogram. Onder Macintosh, zodra u de Belkin USB Flash Drive op de USB-poort aansluit… …verschijnt het disk-pictogram op de ‘Desktop’ (Bureaublad). Onder Linux OS kunt u het apparaat als volgt installeren.
Page 113
Basisfuncties (vervolg) 2. ‘Read and Write’ (Lezen en Schrijven) U kunt bestanden ophalen uit en opslaan in het apparaat zoals bij een harde schijf. Ook de bewerkingen voor lezen en schrijven zijn hetzelfde als bij een harde schijf. 3. Schakelaar voor schrijfbeveiliging Als u de schakelaar voor schrijfbeveiliging in de stand ‘ON’...
Page 114
Basisfuncties (vervolg) Pas op : De led-display mag niet knipperen als u de Belkin USB Flash Drive ontkoppelt. Als de led snel knippert, is er dataverkeer tussen het OS en de Belkin USB Flash Drive. Ontkoppel de Belkin USB Flash Drive dan nog niet.
Page 115
Partitietype U kunt de Belkin USB Flash Drive in drie disktypen partitioneren. In deze handleiding worden de volgende begrippen gebruikt: 1. Public Area (Openbaar gebied) Dit is een gebied waar u net als iedereen allerlei basistaken uitvoert. Deze zijn beschreven in het hoofdstuk ‘Basic functions’ in dit gebied.
Page 116
Partitietype (vervolg) Public Security Drive1 Area Area Change View Through Login & Logout Op deze afbeelding ziet u het werken met één drive.. Public Security Drive1 Area Area Change View Through Login & Logout Public Drive2 Area Op deze afbeelding ziet u het werken met meerdere drives. Type functie Beveiliging Wachtwoord...
Page 117
Microsoft Windows XP installeert, moet u de Belkin 98/SE- driver opnieuw installeren wanneer u het apparaat aansluit. • Onder Windows 98 SE en Windows ME moet u de Belkin USB Flash Drive ontkoppelen en weer aansluiten nadat u de driver hebt geïnstalleerd.
Page 118
• U mag de installatie tijdens de procedure niet annuleren. De mogelijkheid bestaat dat de Belkin USB Flash Drive niet goed werkt als de installatie niet correct voltooid is. • Zie het hoofdstuk ‘Problemen oplossen’ als de installatie zichzelf tijdens de installatieprocedure annuleert, als de installatie niet verloopt zoals aangegeven of als u vermoedt dat de drivers niet correct geïnstalleerd zijn.
Page 119
De weergave hangt af van de status van het apparaat.Macintosh-systemen • U roept het keuzemenu als volgt met uw rechter muisknop op. Vervolgens kiest u de functies die u wilt gebruiken. • Of u kunt dubbelklikken op het pictogram in het systeemvenster. Het ‘Belkin U-Storage’-controlevenster verschijnt.
Page 120
(Grootte wijzigen) is actief als u deze software voor het eerst uitvoert. Belkin USB Flash Drive – grootte wijzigen: Zoals aangegeven in het hoofdstuk ‘Partitietype’ kunt u voor uw Belkin USB Flash Drive de mogelijkheid ‘Resize’ (Grootte aanpassen) gebruiken. Pas op : Door de actie ‘Resize’ (Grootte aanpassen) worden alle data en bestanden in de Belkin USB Flash Drive gewist.
Page 121
De software gebruiken (Belkin U-Storage) op het Windows-platform (vervolg) 4. Als u kiest voor ‘Public Area + Security Area (Enkele drive)’, verschijnt het volgende ‘Security Area’ (Beveiligd gebied)-venster op de voorgrond. Door de schuifbalk in het midden van het venster te verslepen, kunt u de grootte bepalen van ‘Public Area’...
Page 122
De software gebruiken (Belkin U-Storage) op het Windows-platform (vervolg) 5. Als u kiest voor ‘Public Area + Security Area (Dubbele drive)’, verschijnt het volgende ‘Public Area (Drive 1) / Security Area’-venster op de voorgrond. Door de schuifbalk in het venster te verslepen, kunt u de grootte van elk gebied aangeven.
Page 123
& Tools’) automatisch naar de ‘Public Area (Drive 1) gekopieerd. Deze is verwisselbaar. Dit is ook nodig als u het apparaat in een andere computer plaatst. Hierdoor wordt de ‘Belkin U-Storage’-software voor u in de computer geïnstalleerd waarop u wilt werken.
Page 124
Als u een beveiligde partitie aan uw apparaat toewijst, kunt u de beveiligde zone met de volgende inlogprocedure openen. 1. Dubbelklik op het ‘Belkin U-Storage’-pictogram in het systeemvenster of klik op de ‘Login’ (Inlog)-knop in het ‘Belkin U-Storage’-beheervenster. Het venster ‘Unlock Protect’...
Page 125
De software gebruiken (Belkin U-Storage) op het Windows-platform (vervolg) - Als u het verkeerde wachtwoord typt, verschijnt het volgende bericht. -U krijgt drie maal de kans om het goede wachtwoord in te voeren. Na drie mislukte pogingen verschijnt het volgende bericht. Vervolgens moet u het apparaat ontkoppelen en opnieuw aansluiten om verder te kunnen werken.
Page 126
(Beveiligd gebied) bevat verschijnt, kunt u hierin de door u gewenste bewerking uitvoeren. Het venster ‘File Manager’ (Bestandsbeheer) ziet eruit als volgt: Van de ‘Security Area’ (Beveiligd gebied) uitloggen: 1. 1. Dubbelklik op het ‘Belkin U-Storage’-pictogram in het systeemvenster of selecteer de ‘Log-out’ (Uitlog)-knop in het ‘Belkin U-Storage’-beheervenster.
Page 127
Wachtwoord wijzigen: Met de functie ‘Change Password’ (Wachtwoord wijzigen) in het beheermenu’ van ‘Belkin U-Storage’ kunt u het wachtwoord wijzigen en de wachtwoordhint invoeren. U kunt dit onderwerp alleen selecteren in de ‘Security AP Zone’.
Page 128
De software gebruiken (Belkin U-Storage) op het Windows-platform (vervolg) 1 Zorg ervoor dat de ‘Write Protect’ (Schrijfbeveiliging)- schakelaar in de stand ‘OFF’ (Uit) staat. 2 Typ uw bestaande wachtwoord in het vak ‘Current Password’ (Bestaand wachtwoord). 3 Typ vervolgens uw nieuwe wachtwoord en bevestig dit in het vak ‘Confirm Password’...
Page 129
‘OFF’ (Uit) staat. 5 Dit programma kan slechts één apparaat tegelijk verwerken. 6 Zorg ervoor dat uw Belkin USB Flash Drive in de ‘Public Area’ (Openbaar gebied) staat als hij met de functie ‘Security’ (Beveiliging) gebruikt wordt.
Page 130
HDD-opstartmethode is alleen voor Windows 98 geschikt. - Als u ‘USB HDD’ kiest, gaat de computer naar de ‘C:>‘-prompt nadat u vanaf de Belkin USB Flash Drive bent opgestart. - Als u ‘USB ZIP’ kiest, gaat de computer naar de ‘A:>‘-prompt nadat u vanaf de Belkin USB Flash Drive bent opgestart.
Page 131
4 Kopieer alle bestanden van de diskette naar de map ‘XP_Bootable’. 5 Klik in het ‘Belkin U-Storage’-venster op het tabblad ‘Utility’ (Hulpprogramma). Markeer vervolgens de optie USB ZIP. Klik op de knop ‘OK’. 6 Nadat het process is afgerond, verschijnt het slotbericht.
Page 132
Verwijder geen enkel bestand in dit gebied. Anders mislukt het opstarten van uw computer. • Kies de betreffende BIOS-instelling wanneer u de Belkin USB Flash Drive wilt gebruiken voor het opstarten van uw computer. Zie de handleiding van het moederbord.
Page 133
Pas op: Door de actie ‘Recover Disk’ (Disk herstellen) worden alle data en bestanden in de Belkin USB Flash Drive gewist. Deze actie is niet omkeerbaar. Maak eerst een reservekopie van alle belangrijke bestanden en data.
Page 134
Probleem 2: Wanneer u onder Windows XP, 2000, 98 en ME een VIA USB 2.0 hostcontroller gebruikt en op een Belkin USB Flash Drive ‘Resize’ (Grootte wijzigen) uitvoert, veroorzaakt het accesspoint het opnieuw opstarten van het besturingssysteem of een weigering van de functie ‘Resize’.
Page 135
Problemen oplossen (vervolg) Selecteer ‘Device Manager’ ...op de hardwarepagina. Selecteer ‘VIA PCI to USB Enhanced Host Controller’ Onder ‘Universal Serial Bus controllers’ en klik met uw rechter muisknop op om Properties (Eigenschappen) te selecteren. Selecteer vervolgens op de ‘Driver’ -pagina ‘Update ‘Driver’ (Driver bijwerken) .
Page 136
Problemen oplossen (vervolg) Klik op ‘Next’ (Volgende). Selecteer ‘Search for a suitable driver for my device (Recommended).’ (Een geschikt stuurprogramma voor mijn apparaat opzoeken (Aanbevolen)).
Page 137
Problemen oplossen (vervolg) Selecteer vervolgens ‘Microsoft Windows Update’ om de driver bij te werken. Oplossing C: Onder Windows 98 en Windows ME: Werk vanaf de VIA-website de VIA-driver bij tot versie 2.42 of hoger om de bovengenoemde problemen te voorkomen. Als u een USB 2.0-kaart van een andere producent gebruikt en dit probleem doet zich voor, ga dan op dezelfde wijze te werk om de USB 2.0 driver bij te werken of neem contact op met de leverancier of producent van de USB-kaart...
Page 138
Problemen oplossen (vervolg) Probleem 3: Onder Windows XP: Als u de installatiesoftware van Belkin USB Flash Drive verwijdert, is het mogelijk dat de Windows 98 SE driver niet uit de VIA USB 2.0 hostcontroller wordt verwijderd. Dit heeft geen nadelige invloed op het gebruik van de Belkin USB Flash Drive of het computersysteem.
Page 139
Daarom wijzen wij elke aansprakelijkheid voor eventuele fouten en weglatingen van de hand. De fabrikant van de besturingseenheid (controller) van deze Belkin USB Flash Drive, Ours Technology Inc. (OTI), behoudt zich het recht voor zonder voorafgaande kennisgeving wijzigingen aan te brengen in de producten die in deze publicatie zijn vermeld.
Page 140
Verantwoording handelsmerken • IBM is een gedeponeerd handelsmerk van International Business Machines Corporation. • iBook en iMac zijn handelsmerken van Apple Computer, Inc. • Macintosh, PowerBook en Power Macintosh zijn handelsmerken van Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000 en Windows XP zijn handelsmerken van Microsoft Corporation die gedeponeerd zijn in de Verenigde Staten van Amerika en/of in andere landen.
Unidad de Flash USB 2.0 Manual del usuario Acceso fácil a la información; AÑOS transferencia de datos de un DE GARANTÍA ordenador a otro. ¡Protección contraseña! F5U126eaXXX...
Page 143
Capítulo 4. Funciones básicas Página 6-8 Capítulo 5. Tipo de partición Página 9-10 Capítulo 6. Utilización del software (Belkin U-Storage) En la plataforma Windows Página 11-22 Capítulo 7. Función de reinicio Página 23-26 Capítulo 8. Disco de recuperación Página 27 Capítulo 9.
Page 144
Introducción Gracias por su compra de la Unidad Flash USB de Belkin El manual explica cómo usar el paquete de software de Belkin con el dispositivo. Instrucciones de seguridad Siga cuidadosamente las instrucciones de seguridad antes de utilizar la Unidad Flash USB de Belkin y el software de la aplicación.
Page 145
Si desea que el paquete de software de la aplicación funcione con el producto (“Belkin U-Storage “), instale el driver haciendo clic en “Tools” (herramientas) que se encuentra en el menú “Driver & Tools Installation”...
Page 146
Guía de los componentes Interfaz USB Display LED Interfaz USB: - La interfaz se conecta al puerto USB del ordenador. Display LED: - Este display del LED mostrará el estado del dispositivo. Una vez que el dispositivo esté en funcionamiento, el LED se encenderá.
Page 147
Cuando enchufe el dispositivo en el puerto USB de su ordenador, verá el icono “Removable Disk” (disco extraíble) en la ventana de la gestión de archivos. En Macintosh, una vez que enchufe la unidad flash USB de Belkin en el puerto USB, podrá ver el icono del disco en el “Desktop” (escritorio).
Page 148
Funciones básicas (continuación) 2. Lectura y escritura Puede recuperar o almacenar archivos en el dispositivo tal como hace con el disco duro. La operación de lectura/ escritura del dispositivo es la misma que la del disco duro. 3. Conmutador de protección de la escritura Cuando el conmutador de protección de la escritura esté...
Page 149
LED no parpadee. Cuando el LED parpadea rápidamente, quiere decir que hay tráfico entre el sistema operativo y la unidad flash USB de Belkin. No extraiga ahora la unidad flash USB de Belkin. Si lo hace, la información podría dañarse o incluso la propia unidad...
Page 150
Tipo de partición La unidad flash USB de Belkin puede estar dividida en tres tipos de disco. En esta guía usaremos los siguientes términos: 1. Área pública Existe un área en la que cualquier persona puede realizar las funciones básicas, descritas en el capítulo “Basic Functions”...
Page 151
Tipo de partición (continuación) Public Security Drive1 Area Area Change View Through Login & Logout Este diagrama le muestra el funcionamiento de la unidad en detalle. Public Security Drive1 Area Area Change View Through Login & Logout Public Drive2 Area Este diagrama le muestra el funcionamiento de las unidades en detalle.
Page 152
• Si no conecta el dispositivo al puerto USB e instala el software de la aplicación en Microsoft Windows XP, tendrá que instalar el driver 98/SE de Belkin a la vez que enchufa el dispositivo. • En Windows 98 SE y Win Me, desenchufe la unidad flash USB de Belkin y enchúfela después de instalar el driver.
Page 153
Para algunos sistemas Windows, los usuarios deberían registrarse como administradores antes de la instalación. Una vez que haya insertado la unidad flash USB de Belkin en el ordenador con Windows ME/2000/XP, el sistema operativo localizará el driver apropiado o aparecerá la ventana de diálogo “Add New Hardware Wizard”...
Page 154
Utilización del software (Belkin U-Storage) En la plataforma Windows (continuación) Después de instalar el software y el driver correctamente, el icono “Belkin U- Storage “ ( con forma de candado ) aparecerá de modo automático en el área de notificación.
Page 155
Unidad flash USB de Belkin/Redimensión: Tal y como se describe en el capítulo “Partition Type” (tipo de partición), puede llevar a cabo la acción de “Redimensionar” para su unidad flash USB de Belkin. Atención: La acción de “Redimensionar” borrará todos los datos o archivos que existen en la unidad flash USB de Belkin.
Page 156
Utilización del software (Belkin U-Storage) En la plataforma Windows (continuación) 4 Si selecciona “Área pública + Área de seguridad”, más tarde aparecerá la ventana de “Área de seguridad”. Arrastre la barra de desplazamiento hasta la mitad de la ventana para establecer el tamaño de “Área pública” y “Área de seguridad”.
Page 157
Utilización del software (Belkin U-Storage) En la plataforma Windows (continuación) 5 Si selecciona “Área pública + Área de seguridad (Drive doble)”, más tarde aparecerá la ventana de “Área pública (Drive1)/Área de seguridad”. Arrastre la barra de desplazamiento para establcer el tamaño de cada área. Establezca el tamaño de “Área pública (Drive2)”.
Page 158
“Tools.exe” en el CD “Driver & Tools” ) se copiará en el “Área Pública (Drive1)” de modo automático. Es extraíble. De todos modos, se necesita insertar el dispositivo en otro ordenador. El software “Belkin U-Storage” se instalará en el ordenador con el quiera operar.
Page 159
Si la partición del dispositivo está protegida, ejecute la función del inicio de la sesión para acceder al área de seguridad. 1 Haga clic en el icono “Belkin U-Storage” en la ventana de notificación o en el botón [Login/inicio de sesión] de la ventana de gestión del software “Belkin U- Storage”.
Page 160
Utilización del software (Belkin U-Storage) En la plataforma Windows (continuación) - Si introduce una contraseña equivocada, se mostrará el siguiente mensaje. -Puede intentarlo tres veces. Después de estas tres veces, aparecerá el siguiente mensaje. Tendrá que desenchufar y enchufar de nuevo el dispositivo para utilizarlo en un futuro.
Page 161
La ventana de gestión de los archivos es más o menos así Desconexión de la zona de protección de datos: 1 Haga doble clic en el icono “Belkin U-Storage” en la ventana de notificación o en el botón [Logout/desconexión] de la...
Page 162
Área de pública. Cambiar contraseña: El usuario puede cambiar la contraseña e introducir la sugerencia de contraseña mediante la selección “Change Password” (cambiar contraseña) del menú “Belkin U-Storage”. Sólo puede seleccionar este artículo en la “Zona de seguridad AP”.
Page 163
Utilización del software (Belkin U-Storage) En la plataforma Windows (continuación) 1 Asegúrese de que la función de “protección de la escritura” no está activada (“OFF”). 2 Introduzca la contraseña actual en el área “Current Password” (contraseña actual). 3 Introduzca su nueva contraseña y confírmela de nuevo en el área “Confirm Password”...
Page 164
(“OFF”). 5 Este programa sólo trata con un dispositivo al mismo tiempo. 6 Asegúrese de que la unidad flash USB de Belkin está en el “Área Pública” si está protegida mediante la función de “seguridad”.
Page 165
Windows 98. - Si selecciona el “HDD USB”, el ordenador mostrará el mensaje “C:\>” después de reiniciar la unidad flash USB de Belkin. - Si selecciona el “ZIP USB”, el ordenador mostrará el mensaje “A:\>” después de reiniciar la unidad flash USB de Belkin.
Page 166
4 Copie todos los archivos del disquette en el directorio XP_Bootable. 5 Haga clic en el botón [Utility, utilidad] en la ventana de gestión de “Belkin U- Storage”. Seleccione ZIP USB. Haga clic en el botón [OK].
Page 167
área. Podría causar fallos cuando realice el proceso de reinicio de su ordenador. • Cuando quiera utilizar la unidad flash USB de Belkin para reiniciar el ordenador, seleccione la configuración apropiada de la BIOS. Consulte el manual del usuario de la tarjeta madre.
Page 168
Recuperación del menú de inicio, aparecerá la siguiente ventana. Atención: La acción “Recover Disk” (disco de recuperación) borrará todos los datos o archivos que existan en la unidad flash USB de Belkin. Esta acción no es reversible. Realice una copia de todos los archivos e información importante.
Page 169
Problemas conocidos Problema 1: El conmutador de “protección de la escritura” no funciona on-line en los ordenadores Macintosh con sistema operativo Mac 10.1.4. Atención : Si activa la “protección de la escritura” on-line con Mac OS 10.1.4, causará que el sistema del ordenador se cuelgue cuando lea o escriba.
Page 170
Problemas conocidos (continuación) Seleccione la Gestión del dispositivo… en la página de Hardware Seleccione el Controlador del host mejorado PCI VIA/USB y haga clic en el botón derecho del ratón para seleccionar Propiedades. Seleccione entonces el el Driver de Actualización… en la página del Driver.
Page 171
Problemas conocidos (continuación) Haga clic en “Next” (siguiente). Seleccione ”Search for a suitable driver for my device (Recommended)” (Buscar un controlador idóneo para mi dispositivo [Recomendado]).
Page 172
Problemas conocidos (continuación) Seleccione “Microsoft Windows Update” (actualización de Microsoft Windows) para seleccionar el driver. Solución C: En Windows 98 y Windows ME: Actualice el driver VIA/V2.42 o versiones superiores desde el website VIA para prevenir los problemas mencionados más arriba.
Page 173
Problemas conocidos (continuación) Problema 3: En Windows XP: si el usuario desinstala la unidad flash USB de Belkin, es posible que el driver Windows 98/SE no se extraiga del controlador host VIA USB 2.0. Esta situación afectará al uso del dispositivo o del sistema. Después de reiniciar el sistema operativo, el Driver Windows 98/SE reemplazará...
Page 174
El fabricante de esta unidad flash USB de Belkin, “Ours Technology Inc.” (OTI), se reserva el derecho de realizar cambios a cualquier producto de los aquí citados sin previo aviso.
Page 175
Reconocimiento de las marcas registradas • IBM es una marca registrada de la “Business Machines Corporation”. • iBook e iMac son marcas registradas de Apple Computer, Inc. • Macintosh, PowerBook, Power Macintosh son marcas registradas de Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000 y Windows XP son marcas registradas de Microsoft Corporation en los Estados Unidos y/o en otros países.
Page 177
Flash Drive USB 2.0 Manuale Utente Facile accesso ai dati; ANNI permette di trasferire dati DI GARANZIA da un computer all’altro. password di protezione! F5U126eaXXX...
Page 178
Pagina 5 Capitolo 4. Funzioni base Pagina 6-8 Capitolo 5. Tipo di partizione Pagina 9-10 Capitolo 6. Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows Pagina 11-22 Capitolo 7. Funzione di inizializzazione Pagina 23-26 Capitolo 8. Recupero del disco Pagina 27 Capitolo 9.
Page 179
Belkin fornito con il dispositivo. Indicazioni di sicurezza Prima di utilizzare il Flash Drive USB e il software applicativo Belkin, seguire con cura le indicazioni di sicurezza. Accertarsi di utilizzare il software applicativo correttamente, in conformità alle procedure descritte in questa guida.
Page 180
(driver per Windows 98/SE). - Il dispositivo è compatibile con la maggior parte dei sistemi operativi. Per eseguire il software applicativo fornito con il prodotto (“Belkin U- Storage”), installare il driver cliccando sul comando “Tools” (Strumenti) nel menu “Driver & Tools Installation”...
Page 181
Guida ai componenti Interfaccia USB Visualizzazione a LED Interfaccia USB: - L’interfaccia si collega alla porta USB del computer. Visualizzazione a LED: - I LED visualizzano lo stato del dispositivo. Quando il dispositivo è in funzione, il LED si accende.
Page 182
Non appena si collega il dispositivo alla porta USB del computer, nella finestra di gestione dei file compare un’icona “Removable Disk” (Disco estraibile). Nei sistemi Macintosh, collegando il Flash Drive USB Belkin alla porta USB nel desktop compare l’icona del disco.
Page 183
Funzioni base 2. Lettura e scrittura I file possono essere recuperati o salvati nel dispositivo come si fa normalmente con un disco fisso. Il processo di lettura/scrittura del dispositivo avviene come per l’hard disk. 3. Switch di protezione dalla scrittura Portando lo switch di protezione dalla scrittura in posizione “ON”...
Page 184
Funzioni base Avvertenza: Quando si desidera togliere il Flash Drive USB Belkin, accertarsi che il LED non sia lampeggiante. Se il LED lampeggia rapidamente, significa che è in corso uno scambio di dati tra il sistema operativo e il Flash Drive USB Belkin.
Page 185
Tipo di partizione Nel caso del Flash Drive USB Belkin si può eseguire una partizione in tre tipi di disco. In questa guida utilizzeremo i seguenti termini, 1. Area pubblica Si tratta di un’area in cui l’utente e chiunque altro può svolgere qualsiasi funzione base, come descritto nel paragrafo “Funzioni base”.
Page 186
Tipo di partizione Public Security Drive1 Area Area Change View Through Login & Logout Questa figura illustra in dettaglio il funzionamento del drive singolo. Public Security Drive1 Area Area Change View Through Login & Logout Public Drive2 Area Questa figura illustra in dettaglio il funzionamento dei drive multipli. Tipo di Protezione Password...
Page 187
Microsoft Windows XP, il driver Belkin 98/SE deve essere installato di nuovo nel momento in cui viene collegato il dispositivo. • In Windows 98 SE e Win Me, il Flash Drive USB Belkin deve essere scollegato e collegato di nuovo dopo aver installato il driver.
Page 188
Installazione del driver USB: Per alcuni sistemi Windows, gli utenti dovrebbero registrarsi come Amministratore prima di procedere con l’installazione. Una volta inserito il Flash Drive USB Belkin nel computer, in Windows ME/2000/XP, il sistema operativo cerca il driver corretto oppure compare la finestra di dialogo “Add New Hardware Wizard” (Installazione guidata nuovo hardware).
Page 189
Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows Dopo aver installato correttamente il software e i driver, appare automaticamente l’icona “Belkin U-Storage” (sotto forma di lucchetto) nell’area di notifica. La visualizzazione dipende dallo stato del dispositivo. • Per visualizzare il menu di selezione, si può usare il pulsante destro del mouse come indicato nelle immagini seguenti.
Page 190
Inoltre, chiudere tutti i programmi attivi e Windows dallo schermo del computer. 1. Cliccare il pulsante [Resize] (Ridimensiona) nella finestra di gestione del programma “Belkin U-Storage”. Viene visualizzata la seguente finestra “Resize Partition” (Ridimensiona partizione). 2. Selezionare il tipo di partizione desiderato.
Page 191
Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows 4. Se si seleziona l’opzione “Public Area + Security Area (Single Drive)”, compare la seguente finestra “Security Area”. Per impostare le dimensioni dell’“area pubblica” e dell’“area protetta” si può trascinare la barra di scorrimento al centro della finestra.
Page 192
Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows 5. Se si seleziona l’opzione “Public Area + Security Area (Dual Drive)”, compare la seguente finestra “Public Area(Drive1)/Security Area”. Per impostare le dimensioni di ciascuna area si può trascinare la barra di scorrimento nella finestra.
Page 193
“Setup.exe” (esattamente come per “Tools.exe” nel CD “Driver & Tools”) verrà copiato automaticamente in “Public Area (Drive1)”. Questo programma è rimovibile, tuttavia è necessario quando si inserisce il proprio dispositivo in un computer diverso. Serve ad installare il software “Belkin U-Storage” nel computer sul quale si desidera lavorare.
Page 194
Se la partizione del dispositivo è protetta, per accedervi si può eseguire la seguente funzione di “Login”. 1. Fare doppio clic nell’icona “Belkin U-Storage” nella finestra di notifica, oppure cliccare il pulsante [Login] nella finestra di gestione del programma “Belkin U- Storage”.
Page 195
Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows - Se viene digitata la password sbagliata, compare il seguente messaggio. -Si possono eseguire tre tentativi di inserimento della password. Dopo tre tentativi viene visualizzato il seguente messaggio. A questo punto, è...
Page 196
“Security Area”. La finestra del file manager viene visualizzata in questo modo: Disconnessione dalla zona di protezione dati: 1. Fare doppio clic nell’icona “Belkin U-Storage” nella finestra di notifica, oppure cliccare il pulsante [Logout] nella finestra di gestione del programma “Belkin U-Storage”.
Page 197
è possibile eseguire l’operazione desiderata con la “Public Area”. Modifica password: L’utente può modificare la password e digitare il suggerimento usando la selezione “Change Password” (Modifica password) dal menu di gestione del programma “Belkin U-Storage”. Questa voce si può selezionare soltanto nella zona “Security AP Zone”.
Page 198
Utilizzo del software (Belkin U-Storage) sulla piattaforma Windows 1 Accertarsi che l’interruttore “Write Protect” (Protezione scrittura) sia su “OFF”. 2 Digitare la password attuale nella sezione “Current Password”. 3 Quindi, digitare la nuova password e ripeterla nell’area “Confirm Password”. -La password può essere al massimo di 8 caratteri.
Page 199
4 Accertarsi che l’interruttore “Write Protect” (Protezione scrittura) sia su “OFF”. 5 Questo programma può essere utilizzato soltanto su un dispositivo alla volta. 6 Accertarsi che il Flash Drive USB Belkin sia in “Public Area” se è prevista la funzione “Security”.
Page 200
HDD è soltanto per Windows 98. - Scegliendo “USB HDD”, dopo aver eseguito l’inizializzazione dal Flash Drive USB Belkin il computer visualizza il prompt “C:\>”. - Scegliendo “USB ZIP”, dopo aver eseguito l’inizializzazione dal Flash Drive USB Belkin il computer visualizza il prompt “A:\>”.
Page 201
4 Copiare tutti i file presenti nel floppy nella directory XP_Bootable. 5 Cliccare il pulsante [Utility] nella finestra di gestione del programma “Belkin U- Storage”. Quindi selezionare USB ZIP. Cliccare sul pulsante [OK]. 6 Terminato il processo, viene visualizzato il messaggio finale.
Page 202
file da questo spazio. In caso contrario si causerà un errore durante la procedura di inizializzazione del computer. • Se si desidera utilizzare il Flash Drive USB Belkin per avviare il computer, selezionare le rispettive impostazioni dal BIOS. Vedere il manuale utente della scheda madre.
Page 203
Avvertenza: Con il comando “Recover Disk” (Recupera disco) verranno cancellati tutti i dati o file esistenti nel Flash Drive USB Belkin. Quest’azione non è reversibile, è pertanto necessario eseguire una copia di backup di tutti i file o dati importanti.
Page 204
In Windows XP o Windows 2K o |Window 98 o Windows ME, se l’utente utilizza il controller host VIA USB 2.0 e lancia la funzione di ridimensionamento nell’AP del Flash Drive USB Belkin, la funzione di nuova inizializzazione o di ridimensionamento del sistema operativo subisce un guasto.
Page 205
Problemi conosciuti Selezionare Device Manager… (Gestione periferiche) dalla pagina Hardware. Selezionare VIA PCI to USB Enhanced Host Controller in Universal Serial Bus controllers e cliccare il pulsante destro del mouse per selezionare Properties (Proprietà). Quindi selezionare Update Driver… (Aggiorna driver) dalla pagina Driver.
Page 206
Problemi conosciuti Premere Next (Avanti). Selezionate Search for a suitable driver for my device (recommended) (Cerca driver migliore (scelta consigliata).
Page 207
Problemi conosciuti Quindi selezionare Microsoft Windows Update (Aggiornamento di Microsoft Windows) per aggiornare il driver. Soluzione C: In Windows 98 e Windows ME: Aggiornare il driver VIA in V2.42 o superiore dal sito web VIA per evitare i problemi descritti in precedenza. Se l’utente utilizza la scheda USB 2.0 di un’altra marca, seguire la stessa procedura per aggiornare il driver USB 2.0 o contattare il produttore della scheda USB per richiedere una soluzione.
Page 208
Problemi conosciuti Problema 3: In Windows XP: se l’utente disinstalla il Flash Drive USB Belkin, è possibile che il driver Windows 98/SE non venga rimosso dal controller host VIA USB 2.0. Questa situazione non pregiudica in alcun modo l’utilizzo del dispositivo o del sistema.
Page 209
Il produttore del controller di questo Flash Drive USB Belkin, la Ours Technology Inc. (OTI) si riserva il diritto di apportare eventuali modifiche ai prodotti qui presentati...
Page 210
Informazioni sui marchi • IBM è un marchio registrato della Business Machines Corporation. • iBook e iMac sono marchi registrati della Apple Computer, Inc. • Macintosh, PowerBook, Power Macintosh sono marchi registrati della Apple Computer, Inc. • Microsoft, Windows, Windows 98, Windows ME, Windows 2000, e Windows XP sono marchi registrati della Microsoft Corporation negli Stati Uniti e/o in altri paesi.