Contents Page Page 3……………………Installation for Win98 and Win98SE Page 4……………………Installation for WinME Page 4……………………Installation for Win2k Page 5……………………Installation for WinXP Page 6……………………Uninstalling the Software Page 7……………………Password Protection Software P74205ea - 2 -...
Page 3
5) When you insert the device for the first time the following window will appear: 6) When this screen appears press cancel 7) Finally, unplug and then re-plug the device. You are now ready to use your Belkin USB Mass Storage Disk and Management Software! P74205ea - 3 -...
5) Follow the on-screen instructions that are displayed on the screen (Fig.1, page 5) 6) Finally, unplug and then re-plug the device. You are now ready to use your Belkin USB Mass Storage Disk and Management Software! Installation in Windows 2000 1) Once set-up is complete insert your USB Mass Storage Disk into a free USB port, using the supplied cable if required.
You are now ready to use your Belkin USB Mass Storage Disk and Management Software! Installation in Windows XP 1) Once set-up is complete insert your USB Mass Storage Disk into a free USB port, using the supplied cable if required.
Page 6
Uninstalling Belkin UMSD 2.33 1) To uninstall the software go to the Windows start options and select the Belkinud. Click on “uninstall” 2) Choose “yes” at the option prompt. 3) Once completed press complete. 4) To reinstall the software follow the previous procedures.
Page 7
Password Protection Software In order to keep your necessary files secure Belkin has provided password protection software to be used with your USB Mass Storage Device. The following steps show you the various features of this software: 1) In the welcome Screen type in your password to enable use of your USB Mass Storage Device: 2) To change your password click on “Change Password”...
Page 8
Password Protection Software 3) Another feature of this software is to allow partitioning. To access this feature click on the “Resize” tab and follow the on-screen prompts 4) In order to erase your files you may use the following feature. To access this feature click on the “Utility”...