Removing Modules - Belkin BUS STATION F5U100 User Manual

Removing Modules

Instructions for removing modules from the BusStation
Note: Modules should be removed from top to bottom.
Do not remove the middle modules first, doing so will
cause severe damage to your equipment and/or the
BusStation ™ .
1.
Hold the BusStation ™ away from you so that the connectors are
facing you. (See Figure 7).
2.
Using both of your thumbs, push the BusStation
of the BusStation bay. (See Figure 7)
™
3.
The module should slide out smoothly.
Figure 7
Modules should ONLY
be removed from
TOP TO BOTTOM
™
™ module out
10