Table of Contents
Advertisement
8 ControlLogix™ Hydraulic Servo Module
Wire a Removable Terminal Block (RTB)
Your 1756-HYD02 module uses two types of RTBs (each RTB comes
with housing) to connect wiring.
· Cage clamp - Catalog number 1756-TBCH
· Spring clamp - Catalog number 1756-TBS6H
Connect the wires as shown below.
Spring Clamp RTB
1. Strip 7/16 inch (11mm) maximum
length of wire.
2. Insert the screwdriver into the
inner hole of the RTB.
3. Insert the wire into the
open terminal and
remove the screwdriver.
Publication
1756-IN580A-EN-P - March 2003
1. Strip 3/8 inch (9.5mm) maximum
length of wire.
2. Insert the wire into the open terminal.
3. Turn the screw clockwise to close the
terminal on the wire.
20860-M
Cage Clamp RTB
20859-M
Advertisement
Table of Contents
