Table of Contents
Advertisement
left page (47)
of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
Illumination
The illumination for the color display
and the 2nd display can each be set
independently.
Color Display
Set display light brighter/darker.
The darker the setting the longer the
standby time.
2nd Display
Switch the display light on or off.
Contrast
Set color display contrast.
Dynamic Light
m
K
§Menu§
K
Select function.
The dynamic light consists of 7 LEDs
at the edge of the keyboard
(page 12).
It is used to indicate visually different
events and functions, as well as the
current phone status (e.g. network
searching, battery low, etc.).
You can set the visual signal (LEDs)
on the phone for certain functions
and events. The LEDs then flash in
different rhythms depending on the
current function.
You can also create your own flash
rhythms.
K
Dynamic Light
Show Light Effects
This enables you to switch the visual
signal on and off centrally for all
functions and events.
Play Demo
All flash rhythms are displayed in
sequence. End with §Cancel§. Show
next flash rhythm with §Next§.
Brightness
This enables you to set the bright-
ness for the visual signal.
Calls, Group Calls, Other Calls
d
You can assign different flash
rhythms to the relevant call types
and to each group.
During Call
Select a flash rhythm to flash during
the call.
Alarms
Select a flash rhythm to signal an
alarm or appointment.
More Light...
Set the flash rhythm for other
functions or events:
Incoming
messages,
Missed
During
Sending,
Opening
Closing
Clamshell,
Net
Screensaver,
Low
Battery,
Switch
Off,
Charging
Settings
47
Event,
Clamshell,
Search,
Switch
On,
Advertisement
Table of Contents
