Table of Contents
Advertisement
Dynamic Light
m
K
K
§Menu§
K
Select function.
The dynamic light consists of 7 LEDs
at the edge of the keyboard
(page 13).
It is used to indicate visually different
events and functions as well as the
current phone status (e.g.network
searching, low battery, etc.).
You can determine the visual signal
(LEDs) on the phone for certain func-
tions and events. The LEDs then flash
in different rhythms depending on
the current function.
You can also create your own flash
rhythms.
Show Light Effects
This enables you to switch the visual
signal on and off centrally for all
functions and events.
Play Demo
All flash rhythms are displayed in
sequence. End with §Cancel§.
Show next flash rhythm with §Next§.
Brightness
This enables you to set the bright-
ness for the visual signal.
I
Press the navigation key
repeatedly to adjust up or
down.
E
Confirm.
Dynamic Light
Calls, Group Calls, Other Calls
d
You can assign different flash
rhythms to the relevant call types
and to each group.
During Call
Select a flash rhythm to flash during
the call.
Alarms
Select a flash rhythm to signal an
alarm or appointment.
More Light...
Set the flash rhythm for other
functions or events:
Incoming messages
Missed Event
During Sending
Opening Clamshell
Closing Clamshell
Net Search
Screensaver
Low Battery
Switch On
Switch Off
Charging
Special case
Low Battery
Only one flash rhythm can be switched on
or off for that event. When it is switched on,
low battery is indicated by the top two LEDs
flashing slowly. When battery is low, no
flash rhythm can flash for other events.
Settings
71
Advertisement
Table of Contents
