Security; Codes; Clear Sim Card Barring - Siemens Mobile Operating Instructions Manual

Siemens mobile operating instructions
Table of Contents

Advertisement

left page (22)
of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
22

Security

Security
m
K
§Menu§
K
Select function.
The phone and SIM card are pro-
tected against misuse by several
security codes.
Keep these confidential numbers in a
safe place where you can access them
again if necessary.

Codes

PIN Control
You can stop the PIN prompt being
activated when the phone is
switched on, but you then risk
unauthorized use of the phone.
Press.
§Change§
J
Enter PIN and confirm
with §OK§.
Change PIN
You can change the PIN to any 4- to
8-digit number you find easier to
remember.
J
Enter current PIN and
confirm with §OK§.
J
§OK§
Enter new PIN.
,
J
§OK§
Re-enter new PIN.
,
K
Security
Change PIN2
(Display only if PIN2 is available).
Proceed as for
Change
Change Phonecode
You define the phone code (4–8 dig-
its) when you call up a protected
function for the first time. It is then
valid for all phone code protected
functions.

Clear SIM card barring

If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
PIN.

Advertisement

Table of Contents
loading

Table of Contents