Getting Started - Siemens Mobile Operating Instructions Manual

Siemens mobile operating instructions
Table of Contents

Advertisement

left page (15)
of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)

Getting started

Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit card size, snap the
smaller segment out and remove
any rough edges.
Press grooved area
the cover downwards in the direc-
tion of the arrow
• Place the SIM card in the slot with
the contact surface facing down-
wards. Gently push the holder tab
over the SIM card
beveled corner is correctly posi-
tioned).
1
, then remove
2
.
1
2
3
(ensure the
3
Getting started
• Insert the battery into the phone
4
sideways
, then press down-
5
wards
until it snaps into place.
4
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place cover on phone and then
push towards the upper edge,
until it clicks into place
6
Additional information
Please switch off your phone before
removing the battery!
3 V and 1.8 V SIM cards are supported.
Please contact your service provider if
you have an older card.
SIM card problems .......................page 63
15
5
6
.

Advertisement

Table of Contents
loading

Table of Contents