Table of Contents
Advertisement
Step 2: Install the Battery
ATTENTION
!
WARNING
!
1. Install a 1756-BA1 battery.
2. Attach the battery label:
a. Write on the battery label the date you install the battery.
b. Attach the label to the inside of the battery compartment.
Only install a 1756-BA1 battery. If you install a different battery,
you may damage the controller.
For safety information on the handling of lithium batteries,
including the handling and disposal of leaking batteries, see
Guidelines for Handling Lithium Batteries, publication AG-5.4.
Store batteries in a cool, dry environment. We recommend 25°C
with 40% to 60% relative humidity. You may store batteries for
up to 30 days between -45° to 85°C, such as during
transportation. To avoid possible leakage, do not store batteries
above 60°C for more than 30 days.
FlexLogix Controller System
Attach label here.
This jumper is for
service use only. Do
not use this jumper.
Attach battery here.
top
red lead (+)
middle
black lead (-)
bottom
no connection
Publication 1794-IN002F-EN-P - October 2002
7
Advertisement
Table of Contents
