Logging On To Windows 2000; Configuring The 1784-Pcic Card; Changing The Pc Name - Allen-Bradley ProcessLogix R500.1 Installation Instructions Manual

Logging on to Windows 2000

1. Press <Ctrl> + <Alt> + <Delete> to initiate Windows 2000 logon.
2. Enter >ps_user< as the User name.
3. Enter >password< as the default password.
4. Press <Enter> or click OK to complete the logon.
TIP

Configuring the 1784-PCIC Card

Refer to "1784-PCIC Driver and Installation" and "1784-PCIC Firmware Installation" in
Chapter 7 of the ProcessLogix R500.1 Installation and Upgrade Guide for details.

Changing the PC Name

IMPORTANT
ProcessLogix R500.1 Server Installation Instructions
You must repeat the above steps every time you reboot the Server.
If you purchased a new ProcessLogix R500.1 Server from Rockwell
Automation, the operating system and ProcessLogix software have
already been installed.
Once the ProcessLogix R500.1 software is installed, changing the
computer name requires a full uninstall and reinstall of all the
ProcessLogix R500.1 software. Refer to Changing the Computer
Name on a ProcessLogix Server in Chapter 8 of the ProcessLogix
R500.1 Installation and Upgrade Guide.
Publication 1757-IN950A-EN-P - September 2002
5