Changing The Processlogix License - Allen-Bradley ProcessLogix R500.1 Installation Instructions Manual

10 ProcessLogix R500.1 Server Installation Instructions

Changing the ProcessLogix License

The ProcessLogix Server is shipped with a temporary license. You must enter the system ID
and authorization numbers from the supplied license certificate to activate the license options
that you have ordered. To change the license:
1. Click Start
Server to call up the ProcessLogix Server dialog box.
TIP
a. With Full Mode active, click the Database Only option.
b. Click Yes to confirm the action and wait for the Server to change its state.
c. Close the ProcessLogix Server dialog box.
2. Click Start
3. At the Welcome window, click Next.
4. Check the Change software license checkbox and click Next.
5. Enter the new System and Authorization numbers and click Next.
6. Click Next to confirm.
7. If the license includes a new database size, click Yes in the Rebuild Database dialog
box.
Publication 1757-IN950A-EN-P - September 2002
⇒ ⇒
Programs ProcessLogix Server
To display the "Full Mode" version of the ProcessLogix Server dialog
box, click the icon on the left of the title bar and click Advanced
Full Mode.
A checkmark will appear in front of the Full Mode selection to show
that it is active.
⇒ ⇒
Programs ProcessLogix Server
⇒
Start-Stop ProcessLogix
⇒
Setup.
⇒