Table of Contents
Advertisement
Quick Links
ProcessLogix R500.1 Server Installation
Instructions
Before you begin
This publication guides you through the remaining processes required to initialize a
ProcessLogix Server. You are required to finalize the Server installation by completing the
instructions outlined in this document.
This document does not contain complete instructions covering the installation process, and
refers you to procedures contained in other documentation. For a successful installation, have
the following documents available:
• ControlNet PCI Communication Interface Card Installation Instructions, publication
1784-IN003, shipped with the 1784-PCIC card.
• ProcessLogix R500.1 Installation and Upgrade Guide, publication 1757-IN500, shipped
with the ProcessLogix R500.1 Software Kit.
These and other ProcessLogix documents can be found on The Automation Bookstore, at
http://www.theautomationbookstore.com/. The following table lists items that you MUST
complete before attempting to use the ProcessLogix Server.
✔
Step
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Item
Installing the 1784-PCIC Card
Installing the Windows 2000 license and Warranty Transfer
Logging on to Windows 2000
Configuring the 1784-PCIC Card
Changing the PC Name
Changing the Network Settings
Setting the Date and Time
Creating an Emergency Repair Disk
When finished, click OK.
Changing the ProcessLogix License
Installation Instructions
Publication 1757-IN950A-EN-P - September 2002
Page
3
4
5
5
5
6
8
8
8
10
Advertisement
Table of Contents
Related Manuals for Allen-Bradley ProcessLogix R500.1
Summary of Contents for Allen-Bradley ProcessLogix R500.1
-
Page 1: Installation Instructions
• ControlNet PCI Communication Interface Card Installation Instructions, publication 1784-IN003, shipped with the 1784-PCIC card. • ProcessLogix R500.1 Installation and Upgrade Guide, publication 1757-IN500, shipped with the ProcessLogix R500.1 Software Kit. These and other ProcessLogix documents can be found on The Automation Bookstore, at http://www.theautomationbookstore.com/. -
Page 2: Important User Information
(to include intellectual property liability) for actual use based upon the examples shown in this publication. Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of Solid-State Control (available from your local Rockwell Automation office), describes some... -
Page 3: Installing The 1784-Pcic Card
ProcessLogix R500.1 Server Installation Instructions Rockwell Automation Technical Support If you need any assistance with the information found in this document, first call your local Rockwell Automation representative, then: • Phone Support: (440) 646-5800 • Web Support: http://www.ab.com, under Support, click Product Support... -
Page 4: Installing The Windows 2000 License And Warranty Transfer
ProcessLogix R500.1 Server Installation Instructions Installing the Windows 2000 license and Warranty Transfer 1. Turn on the computer. 2. Click the I accept this agreement option and click Next. 3. Verify the information on the Regional Settings window and click Next. -
Page 5: Logging On To Windows 2000
Configuring the 1784-PCIC Card Refer to “1784-PCIC Driver and Installation” and “1784-PCIC Firmware Installation” in Chapter 7 of the ProcessLogix R500.1 Installation and Upgrade Guide for details. Changing the PC Name If you purchased a new ProcessLogix R500.1 Server from Rockwell... -
Page 6: Changing The Network Settings
ProcessLogix R500.1 Server Installation Instructions PC Naming Rules IMPORTANT The Factory default of your PC Names are PLX1, PLX1A, or PLX1B. If you have more than 1 PC on the same network, you must make certain that the PC names and IP addresses are unique (i.e. PLX1, PLX2). - Page 7 ProcessLogix R500.1 Server Installation Instructions The following Private Networking IP Address scheme can be utilized for the system to operate: Table 1: Private Networking IP Address scheme Server Type Suggested Private Networking IP Address Non-Redundant Server or NIC 1: 192.168.0.1 NIC 2: 192.168.1.1...
-
Page 8: Creating An Emergency Repair Disk
ProcessLogix R500.1 Server Installation Instructions Setting the Date and Time To correctly set the date and time: ⇒ ⇒ 1. Click Start Settings Control Panel. 2. Double-click the Date/Time icon. 3. In the Date and Time Properties window: a. If necessary, adjust the Date and Time settings. -
Page 9: Installing The Rslinx Activation File
ProcessLogix applications and stop all ProcessLogix services. For details on this procedure, refer to “Stopping ProcessLogix Applications and Services” in Chapter 8 of the ProcessLogix R500.1 Installation and Upgrade Guide. Your ProcessLogix Server is factory loaded with RSLinx Lite. To activate RSLinx OEM (necessary for full functionality of ProcessLogix) do the following: 1. -
Page 10: Changing The Processlogix License
ProcessLogix R500.1 Server Installation Instructions Changing the ProcessLogix License The ProcessLogix Server is shipped with a temporary license. You must enter the system ID and authorization numbers from the supplied license certificate to activate the license options that you have ordered. To change the license: ⇒... - Page 11 ProcessLogix R500.1 Server Installation Instructions 8. When completed, uncheck the Start ProcessLogix Server checkbox and click Finish. 9. Reboot the computer. To verify your license: ⇒ ⇒ ⇒ 1. Click Start Programs ProcessLogix Server Setup. 2. At the Welcome window, click Next.
- Page 12 ProcessLogix, ControlNet, and Allen-Bradley are trademarks of Rockwell Automation, Inc. Windows 2000 is a registered trademark of the Microsoft Corporation. Dell is a registered trademark of the Dell Computer Corporation. RSLinx is a trademark of Rockwell Software, Inc. Publication 1757-IN950A-EN-P - September 2002 PN 957678-66 ©...