Installing The Windows 2000 License And Warranty Transfer - Allen-Bradley ProcessLogix R500.1 Installation Instructions Manual

4 ProcessLogix R500.1 Server Installation Instructions

Installing the Windows 2000 license and Warranty Transfer

1. Turn on the computer.
2. Click the I accept this agreement option and click Next.
3. Verify the information on the Regional Settings window and click Next.
4. Enter the appropriate Name and Organization and click Next.
5. Enter your Windows 2000 Server Product Key and click Next.
6. At the Date and Time Settings window:
a. If necessary, adjust the Date and Time settings.
b. Set the appropriate Time Zone for your location.
c. Uncheck the Automatically adjust clock for daylight saving changes option.
d. Click Next.
ATTENTION
!
7. At the Windows 2000 Setup window, click Restart Now.
If there is a delay click Restart Now, setup will automatically restart the PC.
8. In order to receive support from Dell, you must fill out their warranty transfer form.
On the form, enter Rockwell in the Current Owner field, N/A in the Order or
Invoice Number field, leave the Customer # field blank, and complete the rest of the
form with your specific information.
The U.S. Ownership Transfer Form is only available online at:
http://www.dell.com/us/en/pub/topics/sbtopic_015_ccare.htm
The International Unit Location Transfer Form is only available online at:
http://www.dell.com/us/en/pub/topics/sbtopic_016_ccare.htm
Publication 1757-IN950A-EN-P - September 2002
Failure to uncheck the Automatic adjustment for Daylight Savings
Time will cause Redundant Systems to loose "Sync" when the time is
automatically adjusted. Choosing not to automatically adjust the time
allows you to decide when to make the adjustment (at a time that is not
critical to your process).