Adjusting The Footstretcher Angle - Shimano SRD Assembling Manual

ROWING

(7) Adjusting the Footstretcher Angle

*All the bolts on Footstretcher system has to be fastened when
you try to check the precise angle, otherwise the
measurements will be inaccurate. measurements will be inaccurate
© 2009 Shimano, Inc. ALL RIGHTS RESERVED
• Adjust the angle of SRD
Footstretcher system by sliding the Footstretcher system by sliding the
upper pipe up and down.
• The standard setting of the angle is
50 degrees up from horizontal.
• You can check it by applying the
angle meter on the Frame Unit.
50°
9