1/2/3 How You Can Measure The Position - Shimano SRD Assembling Manual

ROWING

(12) -1/2/3 How you can measure the position

(12)-１
*The positioning of the root of the thumbs on soles
should be the same in both conventional should be the same in both conventional
Footstretcher and the SRD System.
*The Boat should be laid on the slings in completely
horizontal way. horizontal way
(12)-２ (12)-３
Step (12)-1：Attach the long straight aluminum
rectangle pipe on the work face of the oarlock, and
make it orthogonal to the center line (or keel line) of the
boat.
Step (12)-2：Hang the string on the pipe. This string
represents the horizontal position of the work face
p j projected on the center line.
Step (12)-3：Put a tape measure or a ruler horizontally,
and parallel to the center line. Measure the distance
from the work face position shown in (12)-2 (I) to the
center of the axis of Virtual Pivot (X).
© 2009 Shimano, Inc. ALL RIGHTS RESERVED
p ( ) ( )
15