Table of Contents
Advertisement
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting SIM card/
battery
The service provider supplies you with
a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card
size, snap the smaller segment out
and remove any rough edges.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then push the
SIM card gently inwards
(ensure that the chamfered corner
is in the correct position).
Your phone's dis-
play is supplied
with a protective
film. Remove this
film slowly before
assembling the
phone.
1
Getting started
Please do not use any tools, when
removing the SIM card.
• Insert the battery sideways into
2
the phone
3
downwards
into position.
3
• To remove the battery, pull it out
with the retaining tab on the side.
1
, then press it
until it clicks
2
9
Advertisement
Table of Contents
