Center Console & Panel - Mitsubishi Outlander Sport 2019 Owner's Handbook Manual

DRIVE MODE SELECTOR (IF EQUIPPED)
The drive mode can be switched by
pressing the 4WD button while the
ignition switch is in the ON position.
The following drive modes are available:
2WD: This mode is for economical driving
on normal dry roads and freeways.
4WD AUTO: This mode is for all
driving conditions on various roads.
4WD LOCK: This mode is for driving
in slippery conditions such as on
snow-covered roads or sand.
USB AND IPOD INPUT
®
1. Park your vehicle in a safe place
and turn the ignition switch to the
"OFF" position or put the Operation
Mode in OFF.
2. Plug in the USB connecting cable
that is supplied with your device
and connect the USB end into
the USB port located below the
climate controls.
3. Turn the ignition switch or the Operation Mode to the "ACC"
position. Turn on the audio system.
4. Press MENU on the touch screen.
5. Touch USB.
6. Touch <Folder> then select a track and begin playback.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
AUTOMATIC CLIMATE CONTROLS
A C
B D
A - Turn for temperature control.
B - Push to select outside air (Indicator light off) or
recirculated air (Indicator light on).
C
- Turn to select the blower speed. To the right increases
blower speed. To the left decreases blower speed.
Turned all the way to the left turns the blower off.
NOTE: OFF is located above AUTO.
D
- Push for air conditioning ON/OFF
(Indicator light on/Indicator light off).
E - Turn to select the air flow and direction mode.
F - Push to defog the rear window (Indicator light on).
Rear window defogger light automatically turns off
after 20 minutes.
TO DEFOG FRONT WINDSHIELD
(FOR BOTH AUTOMATIC AND MANUAL)
1. Set the Mode Dial E to defrost
C
2. Set the blower speed to the maximum position.
A
3. Set the temperature to the highest position.
CENTER CONSOLE & PANEL
E
F
position.
13